Biostar H510MH 2.0

6. Tweaker Menu | 43
H510MH 2�0 | H510MX/E 2�0 | H510MH/E 2�0
Package C-State Demoon
This item sets Package C state Demoon.
Opons: Enabled (Default) / Disabled
Package C-State Un-demoon
This item sets Package C-State Un-demoon.
Opons: Enabled (Default) / Disabled
CState Pre-Wake
Disable - Sets bit 30 of POWER_CTL MSR(0x1FC) to 1 to disable the Cstate Pre-Wake.
Opons: Enabled (Default) / Disabled
IO MWAIT Redirecon
This item enableds or disableds IO MWAIT Redirecon. When set, will map IO_read instrucons
sent to TO registers PMG_IO_BASE_ADDRBASE+0 set to MWAIT (oset).
Opons: Disabled (Default) / Enabled
CFG Lock
This item confgire MSR 0xE2[15], CFG lock bit.
Opons: Disabled (Default) / Enabled
Thermal Monitor
This item enables or disables Thermal Monitor.
Opons: Enabled (Default) / Disabled
AVX2 Rao Oset
This item AVX2 Rao Oset. Species number of bins to decrease AVX rao vs. Core Rao. AVX is
a more stressful workload, it is helpful to lower the AVX rao to ensure maximum possible rao
for SSE workloads.
Opons: Auto (Default)
TjMax Oset
This item TjMax Oset. Specied value here is clipped by pCode to support TjMax in the range of
62 to 115 deg Celsius.
Opons: Auto (Default)
TVB Rao Clipping
This service controls Core frequency reducon caused by high package temperatures for
processors that implement the Intel Thermal Velocity Boost (TVB) feature.
Opons: Disabled (Default) / Enabled
TVB Voltage Opmizaons
This service controls thermal based voltage opmizaons for processors that implement the Intel
Thermal Velocity Boost (TVB) feature. Uses Overclocking Mailbox command 0x18/ 0x19
Opons: Enabled (Default) / Disabled