To Next PageTo Next PageHow to troubleshoot no power issue on Biostar Motherboard?
If there's no power in your Biostar Motherboard system, ensure the power cable is securely plugged in. If the problem persists, try replacing the power cable. If neither solution works, it may indicate a more significant issue.
What to do if Biostar H55 HD Motherboard won't boot after installing a second hard drive?
If your Biostar Motherboard system fails to boot after installing a second hard drive, ensure that the master/slave jumpers are correctly set. Also, run the SETUP program and select the correct drive types. If issues persist, contact the drive manufacturers to verify compatibility with other drives.
What to do if Biostar Motherboard shows “Invalid Configuration” or “CMOS Failure”?
If your Biostar Motherboard displays an “Invalid Configuration” or “CMOS Failure” message, review the system’s equipment and ensure the correct information is entered in the setup.
How to fix Biostar H55 HD Motherboard when it only boots from optical drive?
If your Biostar Motherboard system only boots from an optical drive, you should back up your data and application files. Then, reformat the hard drive and reinstall your applications and data using backup disks.
What to do if Biostar Motherboard system is inoperative but has power?
If your Biostar Motherboard system is inoperative but the keyboard lights are on, the power indicator lights are lit, and the hard drives are running, press down firmly on both ends of the DIMM until the module snaps into place, applying even pressure.
General| Brand | Biostar |
|---|---|
| Model | H55 HD |
| Category | Motherboard |
| Language | English |
Provides essential preparation steps before installing the motherboard.
Lists the items included in the motherboard package.
Details the specifications and features of the motherboard hardware.
Identifies and describes the connectors located on the motherboard's rear panel.
Illustrates the physical layout of components and connectors on the motherboard.
Step-by-step guide for installing the CPU onto the motherboard socket.
Details the CPU and system fan headers, including pin assignments and connection.
Instructions for installing DDR3 memory modules and configuring dual channel mode.
Overview of various motherboard connectors and expansion slots like IDE, SATA, PCI, and PCIe.
Explains how to correctly set up jumpers by placing or removing the jumper cap.
Provides detailed pin assignments and functions for various motherboard headers.
Guide on installing drivers and software from the included CD for optimal system performance.
Instructions on installing and launching software utilities, including the optional eHot-Line.
Procedure for updating the motherboard's BIOS using the provided utility.
Discusses extra information such as CPU overheating protection.
Lists and explains AMI BIOS beep codes for diagnosing boot and POST issues.
Provides common probable issues and their solutions for system startup and operation.
