To Next PageTo Next PageHow to troubleshoot no power on Biostar Motherboard?
If your Biostar Motherboard system has no power, with the Power LED off and the power supply fan not working, ensure the power cable is securely plugged in. If it is, try replacing the cable. If the issue persists, contact technical support.
What to do if Biostar TH55B HD only boots from optical drive?
If your Biostar Motherboard system only boots from an optical drive, and the hard disks can be read, but the system fails to boot from a hard disk, back up your data and application files. Then, reformat the hard drive and re-install applications and data using backup disks.
What to do if Biostar TH55B HD system is inoperative but has power?
If your Biostar Motherboard system is inoperative, but the keyboard lights are on, the power indicator lights are lit, and the hard drives are running, press down firmly on both ends of the DIMM with even pressure until the module snaps into place.
What to do if Biostar TH55B HD Motherboard shows 'Invalid Configuration' or 'CMOS Failure'?
If your Biostar Motherboard screen message shows “Invalid Configuration” or “CMOS Failure,” review your system’s equipment and ensure the correct information is in setup.
General| Number of memory slots | 4 |
|---|---|
| Maximum internal memory | 16 GB |
| Processor socket | LGA 1156 (Socket H) |
| Processor manufacturer | Intel |
| USB 2.0 connectors | 3 |
| S/PDIF out connector | Yes |
| Number of SATA connectors | 6 |
| Number of Parallel ATA connectors | 1 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Firewire (IEEE 1394) ports | 0 |
| Power source type | ATX |
| Motherboard form factor | micro ATX |
| Compatible operating systems | Win XP, Vista, 7 |
| PCI slots | 2 |
| LAN controller | Realtek RTL8111D(L) |
| Networking features | 10/100/1000 Mbps |
Weight and Dimensions| Width | 244 mm |
|---|
Essential steps to prepare a safe and stable working environment before installing the motherboard.
Step-by-step guide on how to safely install the CPU into the motherboard socket.
Instructions for installing DDR3 memory modules into the DIMM slots.
Details on various connectors and expansion slots on the motherboard.
Pinout and function of the 16-pin front panel header for switches and LEDs.
Procedure and jumper settings for clearing CMOS data and restoring BIOS defaults.
Explanation of LED indicators for debugging and system status.
Overview of the BIOS settings and configuration options.
Overview of the Overclocking Navigator Engine for system performance tuning.
Detailed guide to customizing personal overclock settings using M.O.S.
Option to adjust the CPU ratio frequency for overclocking.
Setting to select and adjust the CPU frequency.
Adjusting DRAM frequency for optimal system performance.
Detailed settings for advanced DRAM timing configurations.
Adjusting various voltage settings for overclocking and stability.
Guide to the Automatic Overclock System for easy performance enhancement.
Description of the V12 Tech Engine for best overclock performance.
Using the Memory Integration Test to check memory compatibility.
Overview of the BIO-Flasher utility for updating BIOS via USB or floppy.
Step-by-step guide on how to download and update the motherboard BIOS.
Guide to configuring Smart Fan for automatic fan speed control based on temperature.
Instructions for installing drivers and software from the setup CD.
Overview of TOverclocker utility for system performance enhancement.
Options for updating and backing up AWARD BIOS.
Options for updating and backing up AMI BIOS.
Procedure for saving the current BIOS to a file.
Steps for downloading and updating the motherboard BIOS.
Troubleshooting steps for CPU overheating and system shutdown.
Actions to take for POST beep codes indicating system problems.
General troubleshooting steps for common system issues.
