Biostar H510MHP 2.0 User Manual

FCC Informaon and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons. There is no guarantee that interference
will not occur in a parcular installaon.
The vendor makes no representaons or warranes with respect to the contents here and
specially disclaims any implied warranes of merchantability or tness for any purpose. Further
the vendor reserves the right to revise this publicaon and to make changes to the contents here
without obligaon to nofy any party beforehand.
Duplicaon of this publicaon, in part or in whole, is not allowed without rst obtaining the
vendor’s approval in wring.
The content of this user’s manual is subject to be changed without noce and we will not be
responsible for any mistakes found in this user’s manual. All the brand and product names are
trademarks of their respecve companies.
Dichiarazione di conformità sinteca
Ai sensi dell’art. 2 comma 3 del D.M. 275 del
30/10/2002
Si dichiara che questo prodoo è conforme
alle normave vigen e soddisfa i requisi
essenziali richies dalle direve
2004/108/CE, 2006/95/CE e 1999/05/CE
quando ad esso applicabili
Short Declaraon of conformity
We declare this product is complying with the
laws in force and meeng all the essenal
requirements as specied by the direcves
2004/108/CE, 2006/95/CE and 1999/05/CE
whenever these laws may be applied
The terms HDMI and HDMI High-Denion Mulmedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Biostar H510MHP 2.0 Specifications

General

Processor socket	LGA 1200 (Socket H5)
Processor manufacturer	Intel
Compatible processor series	Intel Celeron, Intel Core i3, Intel Core i5, Intel Core i7, Intel Core i9, Intel Pentium
Audio chip	Realtek ALC897
Component for	PC
Motherboard chipset	Intel H510
Audio output channels	7.1 channels
Motherboard form factor	micro ATX
Windows operating systems supported	Windows 10 x64, Windows 11 x64
Memory slots type	DIMM
Number of memory slots	2
Supported memory types	DDR4-SDRAM
Maximum internal memory	64 GB
Supported memory clock speeds	1866, 2133, 2400, 2666, 2933, 3200 MHz
Supported memory module capacities	4GB, 8GB, 16GB, 32GB
Supported storage drive interfaces	M.2, PCI Express 3.0, SATA III
HDCP	Yes
DirectX version	12.0
Parallel processing technology support	-
USB 2.0 connectors	1
Number of SATA III connectors	4
USB 3.2 Gen 2 (3.1 Gen 2) connectors	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Wi-Fi	No
LAN controller	Intel® I219-V
Ethernet interface type	Gigabit Ethernet
BIOS type	UEFI
Cables included	SATA

Weight and Dimensions

Depth	226 mm
Width	185 mm

Summary

FCC Information and Copyright

Chapter 1: Introduction

1.1 Before You Start

Essential preparation steps before installing the motherboard and system components.

1.2 Package Checklist

Lists all the components included in the motherboard package for user verification.

Chapter 2: Hardware Installation

2.1 Install Central Processing Unit (CPU)

Step-by-step guide for correctly installing the CPU into the motherboard socket.

2.2 Install a Heatsink

Instructions for mounting the CPU heatsink and fan assembly onto the motherboard.

2.3 Connect Cooling Fans

Guidance on connecting CPU and system fans to the designated motherboard headers.

2.4 Install System Memory

Detailed steps for installing DDR4 memory modules into the motherboard DIMM slots.

2.5 Expansion Slots

Information on different expansion slots like PCIe and M.2, including their specifications.

2.6 Jumper & Switch Setting

Explains the function and usage of jumpers, specifically the Clear CMOS jumper.

2.7 Headers & Connectors

Details on ATX power connectors and other motherboard headers for system components.

Chapter 3: UEFI BIOS & Software

3.1 UEFI BIOS Setup

Guide to accessing and navigating the BIOS Setup utility for system configuration.

3.2 BIOS Update

Methods for updating the motherboard's BIOS using BIOSTAR utilities.

3.3 Software

Instructions for installing and using bundled software, including the BIOScreen Utility.

Chapter 4: Useful Help

4.1 Driver Installation

Steps to install essential drivers from the provided DVD for optimal system performance.

4.2 AMI BIOS Beep Code

Lists POST BIOS beep codes and their meanings for system diagnostics.

4.3 AMI BIOS Post Code

Provides a list of AMI BIOS post codes and their corresponding operational status.

4.4 Troubleshooting

Common issues, probable causes, and solutions for system startup and operational problems.