Biostar H310MHP 2.0 User Manual

FCC Informaon and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons. There is no guarantee that interference
will not occur in a parcular installaon.
The vendor makes no representaons or warranes with respect to the contents here and
specially disclaims any implied warranes of merchantability or tness for any purpose. Further
the vendor reserves the right to revise this publicaon and to make changes to the contents here
without obligaon to nofy any party beforehand.
Duplicaon of this publicaon, in part or in whole, is not allowed without rst obtaining the
vendor’s approval in wring.
The content of this user’s manual is subject to be changed without noce and we will not be
responsible for any mistakes found in this user’s manual. All the brand and product names are
trademarks of their respecve companies.
Dichiarazione di conformità sinteca
Ai sensi dell’art. 2 comma 3 del D.M. 275 del
30/10/2002
Si dichiara che questo prodoo è conforme
alle normave vigen e soddisfa i requisi
essenziali richies dalle direve
2004/108/CE, 2006/95/CE e 1999/05/CE
quando ad esso applicabili
Short Declaraon of conformity
We declare this product is complying with the
laws in force and meeng all the essenal
requirements as specied by the direcves
2004/108/CE, 2006/95/CE and 1999/05/CE
whenever these laws may be applied

Biostar H310MHP 2.0 Specifications

General

Form Factor	Micro ATX
Socket	LGA 1151
Chipset	Intel H310
Memory Slots	2
Maximum Memory	32GB
Memory Support	DDR4 2400/2133 MHz
PCI Express Slots	1 x PCIe 3.0 x16, 2 x PCIe 2.0 x1
Storage Interface	4 x SATA III
USB Ports	4 x USB 3.1 Gen1, 2 x USB 2.0
Audio	Realtek ALC887
LAN	Realtek RTL8111H
Video Outputs	1 x HDMI
Power Connector	24-pin ATX

Summary

Chapter 1: Introduction

1.1 Before You Start

Instructions for preparing a safe and stable working environment before installing the motherboard.

1.2 Package Checklist

List of items included in the motherboard package.

1.3 Specifications

Detailed technical specifications of the motherboard, including CPU, chipset, memory, and ports.

1.4 Rear Panel Connectors

Description and layout of the connectors on the motherboard's rear panel.

1.5 Motherboard Layout

Diagram illustrating the location of key components and connectors on the motherboard.

Chapter 2: Hardware Installation

2.1 Install Central Processing Unit (CPU)

Step-by-step guide on how to install the CPU into the motherboard socket correctly.

2.2 Install a Heatsink

Instructions for installing the CPU heatsink and fan assembly onto the motherboard.

2.3 Connect Cooling Fans

Details on connecting CPU and system fans to the designated motherboard headers.

2.4 Install System Memory

Procedure for installing DDR4 memory modules into the motherboard slots.

2.5 Expansion Slots

Information about PCI-Express slots and how to install expansion cards.

2.6 Jumper & Switch Setting

Explanation of jumper settings, including how to clear CMOS using the JCMOS1 jumper.

2.7 Headers and Connectors

Details on various motherboard headers and connectors, including power, front panel, and I/O.

Chapter 3: UEFI BIOS & Software

3.1 UEFI BIOS Setup

Guide to accessing and configuring the UEFI BIOS settings on the motherboard.

3.2 BIOS Update

Instructions for updating the motherboard's BIOS using BIOSTAR utilities.

3.3 Software Installation and Utilities

Instructions for installing system software and using utilities like BIOScreen.

Chapter 4: Useful Help

4.1 Driver Installation

Guide to installing motherboard drivers and software from the provided DVD.

4.2 AMI BIOS Beep Codes

List of beep codes generated by the AMI BIOS for diagnosing boot issues.

4.3 AMI BIOS POST Codes

Table of POST codes provided by AMI BIOS for system initialization status.

4.4 Troubleshooting

Common problems and their solutions, including system power, boot issues, and CPU overheating.