Biostar H310MHP 3.0 User Manual

FCC Informaon and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons. There is no guarantee that interference
will not occur in a parcular installaon.
The vendor makes no representaons or warranes with respect to the contents here and
specially disclaims any implied warranes of merchantability or tness for any purpose. Further
the vendor reserves the right to revise this publicaon and to make changes to the contents here
without obligaon to nofy any party beforehand.
Duplicaon of this publicaon, in part or in whole, is not allowed without rst obtaining the
vendor’s approval in wring.
The content of this user’s manual is subject to be changed without noce and we will not be
responsible for any mistakes found in this user’s manual. All the brand and product names are
trademarks of their respecve companies.
Dichiarazione di conformità sinteca
Ai sensi dell’art. 2 comma 3 del D.M. 275 del
30/10/2002
Si dichiara che questo prodoo è conforme
alle normave vigen e soddisfa i requisi
essenziali richies dalle direve
2004/108/CE, 2006/95/CE e 1999/05/CE
quando ad esso applicabili
Short Declaraon of conformity
We declare this product is complying with the
laws in force and meeng all the essenal
requirements as specied by the direcves
2004/108/CE, 2006/95/CE and 1999/05/CE
whenever these laws may be applied

Biostar H310MHP 3.0 Specifications

General

Brand	Biostar
Model	H310MHP 3.0
Category	Motherboard
Language	English

Summary

FCC Information and Copyright

FCC Compliance and Interference

Equipment tested for FCC Part 15 compliance, limits for interference.

Vendor Disclaimers and Rights

Vendor disclaims warranties, reserves right to revise publication.

Content Changes and Trademarks

Manual content subject to change; brand names are trademarks.

Chapter 1: Introduction

Before You Start

Safety and preparation guidelines before installing the motherboard.

Package Checklist

List of included items in the motherboard package.

1.3 Specifications

Core Components and Memory

Details on CPU support, chipset, and DDR4 memory specifications.

Connectivity and Expansion Slots

LAN, Audio, USB, and PCIe expansion slot specifications.

Physical Layout and System Support

Form factor, rear/internal I/Os, and OS support.

1.4 Rear Panel Connectors

Rear Panel Layout Diagram

Visual layout of connectors on the rear panel.

Connector Usage Notes

Notes on HDMI/VGA, audio, and display output configuration.

Audio Channel Configuration

Mapping of audio ports to different channel configurations.

1.5 Motherboard Layout

Motherboard Component Overview

Diagram identifying key motherboard components and headers.

Chapter 2: Hardware installation

2.1 Install Central Processing Unit (CPU)

Step-by-step guide for installing the CPU into the socket.

2.2 Install a Heatsink

Instructions for mounting the CPU heatsink and fan assembly.

2.3 Connect Cooling Fans

How to connect CPU and System fans to motherboard headers.

2.4 Install System Memory

Guide for installing DDR4 memory modules into DIMM slots.

Memory Capacity and Dual Channel Installation

Max memory capacity and requirements for dual channel mode.

2.5 Expansion Slots

Details on PCI-Express Gen3 x16 and Gen2 x1 slots.

Installing an Expansion Card

Step-by-step guide for installing an expansion card.

2.6 Jumper & Switch Setting

Explanation of jumper configuration and clear CMOS procedure.

2.7 Headers & Connectors

Details on ATX 24-pin and ATX 12V 4-pin power connectors.

Front Panel Connectors

Pinouts for front panel headers (F_PANEL, SPKR, SATA).

Front Panel I/O Headers

Pinouts for front panel USB and audio headers.

Serial Port Header (COM1)

Connecting RS-232 serial port to the header.

Chapter 3: UEFI BIOS & Software

3.1 UEFI BIOS Setup

Accessing and navigating the BIOS setup utility.

3.2 BIOS Update Methods

Updating BIOS using BIOSTAR BIO-FLASHER utility via file or internet.

Backup BIOS Function

How to back up the current BIOS settings.

3.3 Software

Installing Software and Drivers

Installing drivers and software from the setup DVD.

BIOScreen Utility for Boot Logo

Customizing the computer's boot logo.

Chapter 4: Useful help

4.1 Driver Installation

Guide for installing drivers and software from the driver DVD.

4.2 AMI BIOS Beep Code

Memory Error Codes

Codes indicating memory errors during boot.

4.3 AMI BIOS post code

AMI BIOS POST Code List

Comprehensive list of POST codes for system initialization.

4.4 Troubleshooting

General System Issues

Common issues and their solutions for system operation.

CPU Overheated Protection

Steps to take if CPU overheating protection is activated.