Biostar H310MHP - User Manual

To Next Page

FCC Informaon and Copyright

This equipment has been tested and found to comply with the limits of a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon

against harmful interference in a residenal installaon. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instrucons,

may cause harmful interference to radio communicaons. There is no guarantee that interference

will not occur in a parcular installaon.

The vendor makes no representaons or warranes with respect to the contents here and

specially disclaims any implied warranes of merchantability or tness for any purpose. Further

the vendor reserves the right to revise this publicaon and to make changes to the contents here

without obligaon to nofy any party beforehand.

Duplicaon of this publicaon, in part or in whole, is not allowed without rst obtaining the

vendor’s approval in wring.

The content of this user’s manual is subject to be changed without noce and we will not be

responsible for any mistakes found in this user’s manual. All the brand and product names are

trademarks of their respecve companies.

Dichiarazione di conformità sinteca

Ai sensi dell’art. 2 comma 3 del D.M. 275 del

30/10/2002

Si dichiara che questo prodoo è conforme

alle normave vigen e soddisfa i requisi

essenziali richies dalle direve

2004/108/CE, 2006/95/CE e 1999/05/CE

quando ad esso applicabili

Short Declaraon of conformity

We declare this product is complying with the

laws in force and meeng all the essenal

requirements as specied by the direcves

2004/108/CE, 2006/95/CE and 1999/05/CE

whenever these laws may be applied

Main Page

Need help?

Do you have a question about the Biostar H310MHP and is the answer not in the manual?

Summary

Chapter 1: Introduction

1.3 Specifications

Detailed technical specifications of the motherboard, including CPU, chipset, memory, and I/O.

1.4 Rear Panel Connectors

Visual guide and description of all connectors located on the motherboard's rear panel.

1.5 Motherboard Layout

Diagram illustrating the placement of components and connectors on the motherboard.

Chapter 2: Hardware installation

2.1 Install Central Processing Unit (CPU)

Step-by-step instructions for safely installing the CPU into its socket on the motherboard.

2.2 Install a Heatsink

Guide on properly mounting the CPU heatsink and fan assembly for optimal cooling.

2.4 Install System Memory

Procedure for inserting DDR4 memory modules into the DIMM slots for system functionality.

2.7 Headers & Connectors

Pin assignments and connection details for power sources and internal motherboard headers.

Chapter 3: UEFI BIOS & Software

3.1 UEFI BIOS Setup

3.2 BIOS Update