Biostar H410MH S2 2.0 User Manual

FCC Informaon and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons. There is no guarantee that interference
will not occur in a parcular installaon.
The vendor makes no representaons or warranes with respect to the contents here and
specially disclaims any implied warranes of merchantability or tness for any purpose. Further
the vendor reserves the right to revise this publicaon and to make changes to the contents here
without obligaon to nofy any party beforehand.
Duplicaon of this publicaon, in part or in whole, is not allowed without rst obtaining the
vendor’s approval in wring.
The content of this user’s manual is subject to be changed without noce and we will not be
responsible for any mistakes found in this user’s manual. All the brand and product names are
trademarks of their respecve companies.
Dichiarazione di conformità sinteca
Ai sensi dell’art. 2 comma 3 del D.M. 275 del
30/10/2002
Si dichiara che questo prodoo è conforme
alle normave vigen e soddisfa i requisi
essenziali richies dalle direve
2004/108/CE, 2006/95/CE e 1999/05/CE
quando ad esso applicabili
Short Declaraon of conformity
We declare this product is complying with the
laws in force and meeng all the essenal
requirements as specied by the direcves
2004/108/CE, 2006/95/CE and 1999/05/CE
whenever these laws may be applied
The terms HDMI and HDMI High-Denion Mulmedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Biostar H410MH S2 2.0 Specifications

General

Form Factor	Micro ATX
Chipset	Intel H410
CPU Socket	LGA 1200
Memory Type	DDR4
Memory Slots	2
Maximum Memory	64GB
Memory Standard	DDR4 2933/2666/2400/2133
PCIe x16 Slots	1
PCIe x1 Slots	2
SATA III Ports	4
LAN	Realtek RTL8111H
Video Outputs	HDMI, VGA
M.2 Slot	1 x M.2 Key M Socket, supports M.2 Type 2280 SATA3 6.0Gb/s SSD
Audio	Realtek ALC887
USB 3.2 Gen1	4 (2 rear, 2 via headers)
USB 2.0	6 (2 rear, 4 via headers)

Summary

FCC Information and Copyright

Chapter 1: Introduction

1.1 Before You Start

Essential safety precautions and preparation steps before installing the motherboard and components.

1.2 Package Checklist

Lists all items included in the motherboard package for user verification and completeness.

1.3 Specifications

Details the technical specifications of the motherboard, including chipset, memory, storage, and I/O.

1.4 Rear Panel Connectors

Illustrates and describes the function of all connectors on the motherboard's rear panel.

1.5 Motherboard Layout

Provides a visual diagram of the motherboard, labeling all key components and headers.

Chapter 2: Hardware installation

2.1 Install Central Processing Unit (CPU)

Step-by-step guide for safely installing the CPU into the motherboard socket, ensuring proper orientation.

2.2 Install a Heatsink

Instructions for mounting the CPU heatsink and fan assembly onto the CPU and motherboard.

2.3 Connect Cooling Fans

Explains how to connect CPU and system fans to the appropriate headers on the motherboard.

2.4 Install System Memory

Detailed instructions for installing RAM modules into the DIMM slots, including proper seating.

2.5 Expansion Slots

Describes the types and specifications of PCI-Express and M.2 expansion slots available on the motherboard.

2.6 Jumper & Switch Setting

Details the function and usage of jumpers, specifically the Clear CMOS jumper.

2.7 Headers & Connectors

Explains the pin assignments and functions of various internal headers and connectors on the motherboard.

Chapter 3: UEFI BIOS & Software

3.1 UEFI BIOS Setup

Guide to accessing and navigating the UEFI BIOS Setup utility for system configuration.

3.2 BIOS Update

Provides methods and steps for updating the motherboard's BIOS using BIOSTAR utilities.

3.3 Software

Information on installing and launching bundled software, including the BIOScreen utility.

Chapter 4: Useful help

4.1 Driver Installation

Instructions on how to install drivers from the provided DVD for optimal system performance.

4.2 AMI BIOS Beep Code

Lists beep codes and their meanings for troubleshooting boot issues.

4.3 AMI BIOS post code

Lists POST (Power-On Self-Test) codes and their corresponding initialization stages.

4.4 Troubleshooting

Provides solutions for common hardware and system issues, including CPU overheating protection.