To Next PageTo Next Page
Need help?Do you have a question about the Biostar H61MGV3 and is the answer not in the manual?
General| Form Factor | Micro ATX |
|---|---|
| Chipset | Intel H61 |
| CPU Socket | LGA 1155 |
| Memory Slots | 2 x DDR3 DIMM |
| Max Memory | 16 GB |
| Memory Speed | DDR3 1600/1333/1066 MHz |
| PCIe Slots | 1 x PCIe 3.0 x16, 1 x PCIe 2.0 x1 |
| SATA Ports | 4 x SATA 3Gb/s |
| Audio | Realtek ALC662 6-Channel HD Audio |
| LAN | Realtek RTL8111E Gigabit LAN |
| CPU Support | Intel Core i7/i5/i3/Pentium/Celeron |
| Rear I/O | 4 x USB 2.0 |
| Video Outputs | 1 x VGA |
| Power Connector | 24-pin ATX + 4-pin ATX 12V |
| USB Ports | 8 x USB 2.0 (4 on rear panel, 4 via internal headers) |
Displays system information including UEFI BIOS version, model name, and build date.
Allows setting the system date.
Allows setting the system internal clock.
Configures PCI, PCI-X, and PCI Express settings.
Manages Advanced Configuration and Power Interface settings.
Settings related to the CPU, including Hyper-Threading and core control.
Controls Serial ATA device operation modes.
Configures Platform Controller Hub Input/Output devices.
Settings for PCI Express port speed and power management.
Manages integrated and discrete graphics settings.
Sets the number of seconds to wait for the setup activation key.
Determines the keyboard NumLock state at boot.
Configures Compatibility Support Module settings for booting.
Sets a password to restrict access to BIOS setup.
Sets a password required for booting or entering setup.
Enables or disables the Fixed CPU Ratio.
Adjusts the CPU ratio when Fixed CPU Ratio is enabled.
Manually or automatically regulates DRAM Timing.
Exits setup without saving changes.
Saves changes and resets the system.
Loads factory default BIOS settings.
