To Next PageTo Next PageWhat to do if my Biostar Motherboard has no power?
If there is no power in the system, and the Power LED does not shine, the fan of the power supply does not work, and the indicator light on the keyboard does not shine, make sure the power cable is securely plugged in. If that doesn't work, replace the cable.
What to do if Biostar H61MHB Motherboard system does not boot from hard disk drive?
If the system does not boot from a hard disk drive, but can be booted from an optical drive, check the cable running from the disk to the disk controller board. Make sure both ends are securely plugged in and check the drive type in the standard CMOS setup. Backing up the hard drive is extremely important, as all hard disks are capable of breaking down at any time.
What to do if my Biostar H61MHB displays 'Invalid Configuration' or 'CMOS Failure'?
If the screen message shows “Invalid Configuration” or “CMOS Failure,” review the system’s equipment and make sure the correct information is in the setup.
What to do if Biostar H61MHB system cannot boot after installing a second hard drive?
If the system cannot boot after the user installs a second hard drive, set the master/slave jumpers correctly. Run the SETUP program and select the correct drive types.
General| Brand | Biostar |
|---|---|
| Model | H61MHB |
| Category | Motherboard |
| Language | English |
Displays system information like BIOS version, model name, and build date.
Allows setting the system date and internal clock.
Shows the current user's access level within the BIOS.
Configures PCI, PCI-X, and PCI Express settings.
Manages ACPI sleep states and wake-up event controls.
Configures CPU-related features like Hyper-Threading and core settings.
Configures SATA controllers, ports, and USB support.
Controls CPU fan speed based on temperature and fan modes.
Configures Super IO devices, including serial and parallel ports.
Displays hardware status like temperatures, fan speeds, and voltages.
Configures North Bridge settings including memory and graphics adapter.
Manages IGD memory, render standby, DVMT mode, and multi-monitor.
Configures PCI Express ports, South Bridge, audio, and timers.
Manages USB settings, PCI bridges, and PCI Express x1.
Sets prompt timeout, NumLock state, logo display, and GateA20.
Manages Option ROM messages, Interrupt 19 capture, and boot success beep.
Configures UEFI boot, CD/DVD ROM, and Hard Drive priorities.
Sets Administrator and User passwords for system security.
Selects BIOS entry page and configures CPU ratio, power limits, SpeedStep, and Turbo Mode.
Manages CPU C1E, Graphics Core Ratio, CPU VCore, and IGD VCore settings.
Configures DDR3 DRAM multiplier, timings, command rate, and voltage.
Configures PWM settings, CPU PLL, PCH voltage, and displays DDR3 SPD info.
Provides options to discard changes, save changes, or restore defaults.
Allows boot override and execution of the built-in EFI Shell.
