EasyManua.ls Logo

Biostar H170GTN - User Manual

Biostar H170GTN
76 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
FCC Informaon and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons. There is no guarantee that interference
will not occur in a parcular installaon.
The vendor makes no representaons or warranes with respect to the contents here and
specially disclaims any implied warranes of merchantability or tness for any purpose. Further
the vendor reserves the right to revise this publicaon and to make changes to the contents here
without obligaon to nofy any party beforehand.
Duplicaon of this publicaon, in part or in whole, is not allowed without rst obtaining the
vendor’s approval in wring.
The content of this user’s manual is subject to be changed without noce and we will not be
responsible for any mistakes found in this user’s manual. All the brand and product names are
trademarks of their respecve companies.
Dichiarazione di conformità sinteca
Ai sensi dell’art. 2 comma 3 del D.M. 275 del
30/10/2002
Si dichiara che questo prodoo è conforme
alle normave vigen e soddisfa i requisi
essenziali richies dalle direve
2004/108/CE, 2006/95/CE e 1999/05/CE
quando ad esso applicabili
Short Declaraon of conformity
We declare this product is complying with the
laws in force and meeng all the essenal
requirements as specied by the direcves
2004/108/CE, 2006/95/CE and 1999/05/CE
whenever these laws may be applied

Table of Contents

Other manuals for Biostar H170GTN

Preview: User Guide
User Guide36 pages

Questions and Answers

  • B
    Brian JonesAug 11, 2025
    What to do if Biostar Motherboard won't boot from hard drive?
    • L
      Laura BarrettAug 11, 2025
      If your Biostar Motherboard doesn't boot from the hard disk but boots from the optical drive, check the cable running from the disk to the disk controller board to ensure both ends are securely plugged in. Also, verify the drive type in the standard CMOS setup. Backing up the hard drive is extremely important, as all hard disks are capable of breaking down at any time.
  • J
    James WilliamsAug 17, 2025
    How to fix Biostar H170GTN not booting after installing second hard drive?
    • D
      Diana MerrittAug 17, 2025
      If your Biostar Motherboard system cannot boot after installing a second hard drive, set the master/slave jumpers correctly. Then, run the SETUP program and select the correct drive types. You may also call the drive manufacturers to check for compatibility with other drives.
  • D
    daniellevyAug 23, 2025
    What to do if my Biostar Motherboard shows 'Invalid Configuration'?
    • J
      jennifercrawfordAug 23, 2025
      If the screen shows “Invalid Configuration” or “CMOS Failure” on your Biostar Motherboard, review the system’s equipment and make sure the correct information is in the setup.
  • J
    Joel BanksAug 29, 2025
    What to do if Biostar H170GTN is inoperative but lights are on?
    • B
      burtonmelindaAug 29, 2025
      If your Biostar Motherboard system is inoperative but the keyboard lights are on, the power indicator lights are lit, and the hard drives are running, press down firmly on both ends of the DIMM with even pressure until the module snaps into place.
  • E
    Erica ArnoldSep 4, 2025
    How to troubleshoot no power on Biostar Motherboard?
    • S
      Steven MullenSep 4, 2025
      If there is no power in your Biostar Motherboard system, and the power LED does not shine, and the fan of the power supply does not work, make sure the power cable is securely plugged in. If it is, try replacing the cable.

Summary

Chapter 1: Introduction

1.3 Specifications

Detailed technical specifications of the motherboard components and features.

1.4 Rear Panel Connectors

Diagram and description of the motherboard's external I/O ports and connectors.

1.5 Motherboard Layout

Top view diagram illustrating the placement of major components and headers on the motherboard.

Chapter 2: Hardware Installation

2.1 Install Central Processing Unit (CPU)

Step-by-step guide for installing the CPU onto the motherboard socket.

2.2 Install a Heatsink

Instructions for mounting the CPU cooler and heatsink assembly.

2.3 Connect Cooling Fans

2.4 Install System Memory

Guide for installing DDR4 memory modules into DIMM slots.

2.5 Expansion Slots

Information on various PCI-Express and M.2 slots available on the motherboard.

Power and Front Panel Connectors

Details on ATX power, front panel headers, and speaker connectors.

JFRONT_USB3_1: Header for USB 3.0 Ports

F_USB1: Header for USB 2.0 Ports

F_AUDIO1: Front Panel Audio Header

Chapter 3: UEFI BIOS & Software

3.1 UEFI BIOS Setup

3.2 BIOS Update

Overview of utilities for updating the motherboard's BIOS.

BIOS Update Utility (via Internet)

Instructions for updating BIOS using the internet-based utility.

BIOS Update Utility (via File)

Instructions for updating BIOS using a downloaded BIOS file.

3.3 Software

RACING GT Utility

System Information

SmartEAR

H;W Monitor

Chapter 4: Useful Help

4.1 Driver Installation

Instructions for installing drivers and software from the provided DVD.

4.4 Troubleshooting

Common issues and their solutions for system startup and operation.

4.5 RAID Functions

Biostar H170GTN Specifications

General IconGeneral
BrandBiostar
ModelH170GTN
CategoryMotherboard
LanguageEnglish

Related product manuals