Biostar H170GTN User Manual (English)

Other manuals for Biostar H170GTN

Questions and Answers:

B
Brian JonesAug 11, 2025
What to do if Biostar Motherboard won't boot from hard drive?
- L
  Laura BarrettAug 11, 2025
  If your Biostar Motherboard doesn't boot from the hard disk but boots from the optical drive, check the cable running from the disk to the disk controller board to ensure both ends are securely plugged in. Also, verify the drive type in the standard CMOS setup. Backing up the hard drive is extremely important, as all hard disks are capable of breaking down at any time.
J
James WilliamsAug 17, 2025
How to fix Biostar H170GTN not booting after installing second hard drive?
- D
  Diana MerrittAug 17, 2025
  If your Biostar Motherboard system cannot boot after installing a second hard drive, set the master/slave jumpers correctly. Then, run the SETUP program and select the correct drive types. You may also call the drive manufacturers to check for compatibility with other drives.
D
daniellevyAug 23, 2025
What to do if my Biostar Motherboard shows 'Invalid Configuration'?
- J
  jennifercrawfordAug 23, 2025
  If the screen shows “Invalid Configuration” or “CMOS Failure” on your Biostar Motherboard, review the system’s equipment and make sure the correct information is in the setup.
J
Joel BanksAug 29, 2025
What to do if Biostar H170GTN is inoperative but lights are on?
- B
  burtonmelindaAug 29, 2025
  If your Biostar Motherboard system is inoperative but the keyboard lights are on, the power indicator lights are lit, and the hard drives are running, press down firmly on both ends of the DIMM with even pressure until the module snaps into place.
E
Erica ArnoldSep 4, 2025
How to troubleshoot no power on Biostar Motherboard?
- S
  Steven MullenSep 4, 2025
  If there is no power in your Biostar Motherboard system, and the power LED does not shine, and the fan of the power supply does not work, make sure the power cable is securely plugged in. If it is, try replacing the cable.