Biostar M7VIQ Bios Setup Manual

M7VIQ BIOS Setup
27
graphic controller is on an ISA bus, the Write Access to the palette will not show up on the
ISA bus if the PCI VGA controller responds to the Write.
In this case, the PCI VGA controller should not respond to the Write, it should only snoop
the data and permit the access to be forwarded to the ISA bus. The non-VGA ISA graphic
controller can then snoop the data on the ISA bus. Unless you have the above situation,
you should disable this option.
Disabled (default) Disables the function.
Enabled Enables the function.
Assign IRQ For VGA
Lets the user choose which IRQ to assign for the VGA.
The Choices: Enabled (default), Disabled.
Assign IRQ For USB
Lets the user choose which IRQ to assign for the USB.
The Choices: Enabled (default), Disabled.

Biostar M7VIQ Specifications

General

Brand	Biostar
Model	M7VIQ
Category	Motherboard
Language	English