NF520-A2 TE/NF520-A2 SE/NF520-A2
2
ACPI Support
Phoenix-Award ACPI BIOS support Version 1.0b of Advanced Configuration
and Power interface specification (ACPI). It provides ASL code for power
management and devic e configuration capabilities as defined in the ACPI
specification, developed by Microsoft, Intel and Toshiba.
PCI Bus Support
This PHOENIX-AWARD BIOS also supports Version 3.0 of the Intel PCI
(Peripheral Component Interconnect) local bus specification.
DRAM Support
DDR2 SDRAM (Double Data Rate Synchronous DRAM) is supported.
Supported CPUs
This PHOENIX-AWARD BIOS supports the AMD CPU.
Using Setup
Use the arrow keys to highlight items in most of the place, press <Enter> to
sel
e
c
t
, u
se
t
he
<PgU
p>
an
d <PgDn
>
key
s t
o
c
ha
nge
ent
r
ie
s, pr
e
s
s
<F
1
> f
o
r
hel
p
and press <Esc> to quit. The following table provides more detail about how to
navigate in the Setup program by using the keybo ard.
Keystroke Function
Up arrow Move to p revio us item
Down a rrow Move to next item
Left arrow Move to the item o n the left (menu bar)
Right arro w Move to the item on the right (me nu bar)
Move Enter Move to the item you desired
PgUp key Increase the numeric value or make changes
PgDn key Decrease the numeric value or make changes
+ Key Increase the numeric value or make changes
- Key Decrease the numeric value or make changes
Esc key Main Menu – Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu – Exit
Current page and return to Main Menu
F1 key General help on Setup navigation keys
F5 key Load previous values from CMOS
F7 key Load the optimized defaults
F10 key Save all the CMOS changes and exit
To Next Page
Loading...
Need help?
General
