Biostar NF520-A2 - BIOS SETUP - Page 39

NF520-A2 TE/NF520-A2 SE/NF520-A2
38
Trfc2 for DIMM2
The Choices: Auto (default) , 75ns, 105ns, 127.5ns, 195ns, 327.5ns.
Drive Strength setting
Dram driver weak mode
The Choices: Auto (default), Normal, Weak.
CKE drive strength
The Choices: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
CS drive strength
The Choices: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
MA drive strength
The Choices: Auto (default), 1.0x, 1.25x, 1.5x, 2.0x.
MCLK drive strength
The Choices: Auto (default), 0.75x, 1.0x, 1.25x, 1.50x.
MD drive strength
The Choices: Auto (default), 0.75x, 1.0x, 1.25x, 1.50x.
DQS drive strength
The Choices: Auto (default), 0.75x, 1.0x, 1.25x, 1.50x.