To Next PageTo Next PageWhat to do if Biostar Motherboard has no power?
First, ensure the power cable is securely plugged into the Biostar Motherboard. If the issue persists, try replacing the power cable. If problems continue, contact technical support.
Why won't my Biostar Motherboard boot from the hard drive?
Check the cable that runs from the hard disk to the disk controller board on your Biostar Motherboard. Make sure both ends are securely plugged in. Also, verify the drive type in the standard CMOS setup. It's also important to back up your hard drive, as all hard disks are capable of failing at any time.
How to fix Biostar Racing X470GTN Motherboard not booting after installing a second hard drive?
When installing a second hard drive and your Biostar Motherboard fails to boot, set the master/slave jumpers correctly. Then, run the SETUP program and select the correct drive types. If issues persist, contact the drive manufacturers for compatibility information with other drives.
What to do if CPU overheated on Biostar Racing X470GTN?
If the CPU overheats on your Biostar Motherboard: 1. Remove the power cord from the power supply for a few seconds. 2. Wait a moment. 3. Plug the power cord back in and boot up the system. 4. Clear the CMOS data. 5. Wait a few seconds. 6. Power on the system again.
Why does my Biostar Motherboard show 'Invalid Configuration' or 'CMOS Failure'?
Review your system's equipment and ensure that the correct information is entered in the setup.
General| Form Factor | Mini-ITX |
|---|---|
| Chipset | AMD X470 |
| Socket | AM4 |
| Memory Type | DDR4 |
| Memory Slots | 2 |
| Max Memory Capacity | 32GB |
| Expansion Slots | 1 x PCIe 3.0 x16 |
| SATA 6Gb/s Ports | 4 |
| USB 3.1 Gen1 Ports (Rear) | 2 |
| USB 3.1 Gen2 Type-A Ports (Rear) | 1 |
| USB 2.0 Ports (Front) | 2 |
| Audio Codec | Realtek ALC892 |
| LAN | Realtek RTL8111H |
| Video Outputs | 1 x HDMI, 1 x DisplayPort |
| RAID Support | RAID 0, 1, 10 |
| Memory Speed | 3200+(OC) MHz |
| M.2 Slots | 1 x M.2 |
Detailed technical specifications of the motherboard's components and features.
Step-by-step instructions for correctly installing the CPU into its socket.
Guidance on mounting CPU heatsink and fan assemblies (Type A & B).
Instructions for properly inserting DDR4 memory modules into DIMM slots.
Information on PCIe and M.2 slot specifications, compatibility, and bandwidth.
How to access and navigate the BIOS setup utility for system configuration.
Procedures for updating the motherboard's BIOS using different methods.
Provides tools for saving, loading, and applying overclocking and voltage settings.
Guide to installing motherboard drivers and bundled software from the provided DVD.
Common system issues and their step-by-step solutions for diagnosis and repair.
