TA970XE UEFI BIOS Manual
29
MCT Timing Mode
This item allo ws you to select the DRAM Frequency programming method. If Auto,
the DRAM speed will be based on SPDs. If Limit, the DRAM speed will not exceed
the specified value. If Manual, the DRAM speed specified will be programmed
regardless of SPD.
Options: Auto (Default) / Limit / Manual
Memclock Value
This item allows you to set the Memory Clock.
Options: DDR 800 (Default) / DDR 1066 / DDR 1333 / DDR 1600
DRAM Timing Mode
This item allows you to choose to manually or automatically regulate the DRAM
Timing.
Options: Auto (Default) / DCT0 / DCT1 / Both
CL
Options: Auto (Default) / 4~12 CLK
2TCMD
Options: Auto (Default) / 1T / 2T
TRCD
Options: Auto (Default) / 5~12 CLK
TRP
Options: Auto (Default) / 5~12 CLK
TRTP
Options: Auto (Default) / 4~7 CLK
TRAS
Options: Auto (Default) / 15~30 CLK
TRC
Options: Auto (Default) / 11~42 CLK
To Next Page
Loading...
Need help?
General
