Biostar TH67B - SATA Configuration; Sata Mode; Aggressive Link Power Management

TH67+/TH67/TH67B UEFI BIOS Manual
10
Local x2APIC
This item enables Local x2APIC. Some OSes do not support this feature.
Options: Disabled (Default) / Enabled
SATA Configuration
BIOS SETUP UTILITY
SATA Configuration
SATA Port1:
SATA Port2:
SATA Port3:
SATA Port4:
SATA Port5:
SATA Port6:
Serial-ATA Controller 0 [Compatible]
Serial-ATA Controller 1 [Enhanced]
SATA Mode [IDE Mode]
Version x.xx.xxxx. Copyright© 201x, American Megatrends, Inc.
Advanced
(1) IDE Mode. (2) AHCI Mode.
(3) RAID Mode.
Select Screen
Select Item
Select
Change Opt.
General Help
Optimized Defaults
Save & Reset
Exit
Enter
+/-
F1
F3
F4
ESC
SATA Mode
This item sets SATA Mode.
Options: IDE Mode (Default) / AHCI Mode / RAID Mode / Disabled
Serial-ATA Controller 0
This item enables/disables Serial ATA Controller 0.
Options: Compatible (Default) / Disabled / Enhanced
Serial-ATA Controller 1
This item enables/disables Serial ATA Controller 1.
Options: Enhanced (Default) / Disabled
Aggressive Link Power Management
Aggressive Link Power Management Support.
Options: Enabled (Default) / Disabled