Biostar TZ77A Setup Manual

TZ77XE3/TZ75XE3
7
Step 3: Hold processor with your thumb and index fingers, oriented as
shown. Align the notches with the socket. Lower the processor
straight down without tilting or sliding the processor in the socket.
Step 4: Hold the CPU down firmly, and then lower the lever to locked
position to complete the installation.
Step 5: Put the CPU Fan and heatsink assembly on the CPU and buckle it
on the retention frame. Connect the CPU FAN power cable into
the CPU_FAN1 to complete the installation.

Biostar TZ77A Specifications

General

Brand	Biostar
Model	TZ77A
Category	Motherboard
Language	English