Biostar Z490GTA EVO - User Manual

FCC Informaon and Copyright
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instrucons,
may cause harmful interference to radio communicaons. There is no guarantee that interference
will not occur in a parcular installaon.
The vendor makes no representaons or warranes with respect to the contents here and
specially disclaims any implied warranes of merchantability or tness for any purpose. Further
the vendor reserves the right to revise this publicaon and to make changes to the contents here
without obligaon to nofy any party beforehand.
Duplicaon of this publicaon, in part or in whole, is not allowed without rst obtaining the
vendor’s approval in wring.
The content of this user’s manual is subject to be changed without noce and we will not be
responsible for any mistakes found in this user’s manual. All the brand and product names are
trademarks of their respecve companies.
Dichiarazione di conformità sinteca
Ai sensi dell’art. 2 comma 3 del D.M. 275 del
30/10/2002
Si dichiara che questo prodoo è conforme
alle normave vigen e soddisfa i requisi
essenziali richies dalle direve
2004/108/CE, 2006/95/CE e 1999/05/CE
quando ad esso applicabili
Short Declaraon of conformity
We declare this product is complying with the
laws in force and meeng all the essenal
requirements as specied by the direcves
2004/108/CE, 2006/95/CE and 1999/05/CE
whenever these laws may be applied

Summary

Chapter 1: Introduction

1.1 Before You Start

Safety and setup guidelines before installing the motherboard.

1.2 Package Checklist

Lists the items included in the motherboard package.

1.3 Specifications

Details the technical specifications of the motherboard.

1.4 Rear Panel Connectors

Describes the ports and connectors on the rear panel of the motherboard.

1.5 Motherboard Layout

Provides a diagram and labels of the motherboard components and connectors.

Chapter 2: Hardware Installation

2.1 Install Central Processing Unit (CPU)

Step-by-step guide for installing the CPU onto the motherboard socket.

2.2 Install a Heatsink

Instructions for mounting the CPU heatsink and fan assembly.

2.3 Connect Cooling Fans

Details on connecting CPU and system fans to motherboard headers.

2.4 Install System Memory

Guide for installing DDR4 memory modules into the DIMM slots.

2.5 Expansion Slots

Information on PCI-Express and M.2 slots, including installation procedures.

2.6 Jumper & Switch Setting

Configuration of jumpers and DIP switches on the motherboard for system settings.

2.7 Headers & Connectors

Details on various motherboard headers and connectors, including power and I/O.

2.8 Buttons, Indicators & LEDs

Information on onboard buttons, indicators, and LEDs for system status.

Chapter 3: UEFI BIOS & Software

3.1 UEFI BIOS Setup

How to access and configure BIOS settings for the computer.

3.2 BIOS Update

Procedures for updating the motherboard's BIOS using BIOSTAR utilities.

3.3 Software

Instructions for installing and launching system software utilities like BIOScreen.

Chapter 4: Useful help

4.1 Driver Installation

Guide to installing drivers and software from the included DVD.

4.2 AMI BIOS Beep Code

Lists beep codes used during BIOS POST for troubleshooting.

4.3 AMI BIOS post code

Lists POST codes displayed during the BIOS boot process for diagnostics.

4.4 Troubleshooting

Common system issues and their solutions, including CPU overheating.

4.5 RAID Functions

Explains different RAID configurations (RAID 0, 1, 10, 5) and their features.

4.6 Intel Optane Technology

Information about Intel Optane technology and its requirements for enhanced storage.

Biostar Z490GTA EVO Specifications