Biostar Z590MHP User Manual

8 | Chapter 2: Hardware installaon
Chapter 2: Hardware installaon
2.1 Install Central Processing Unit (CPU)
Step 1: Locate the CPU socket on the motherboard
Note
»
»
Remove pin cap before installaon, and make good preservaon for future use. When the CPU is
removed, cover the pin cap on the empty socket to ensure pin legs won’t be damaged.
»
»
The motherboard might equip with two dierent types of pin cap. Please refer below instrucon to
remove the pin cap.
Step 2: Pull the socket locking lever out from the socket and then raise the lever up.
Step 3: Remove the Pin Cap.
9 / 134 8 / 132 9 / 134 8 / 132 9 / 134 8 / 132 9 / 134

Biostar Z590MHP Specifications

General

Brand	Biostar
Model	Z590MHP
Category	Motherboard
Language	English