17
Please follow the procedures below to skip an AUTO.BAS program.
1. Turn off printer power.
2. Press the FEED button and then turn on power.
3. Release the FEED button when LED becomes solid green.
The LED color will be changed as following:
Amber Æ red (5 blinks) Æ amber (5 blinks) Æ green (5 blinks) Æ green/amber (5 blinks)
Æ red/amber (5 blinks) Æ solid green
4. Printer will be interrupted to run the AUTO.BAS program.
To Next Page
Loading...
