N
Nicole JonesJul 29, 2025
What to do if BIRD Amplifier has logic circuit failure?
- JJuan LambJul 29, 2025
If you experience a logic circuit failure with your BIRD Amplifier, return the MCA to the factory for repair.
To Next PageTo Next PageWhat to do if BIRD Amplifier has logic circuit failure?
If you experience a logic circuit failure with your BIRD Amplifier, return the MCA to the factory for repair.
Procedure to determine and set reserve attenuation for optimal system performance.
Procedure for adjusting multicoupler attenuation to achieve proper system gain.
Procedure to measure receiver sensitivity after the system has been installed.
Procedure to measure sensitivity using a dummy load for diagnostics.
Testing output signal levels to verify performance and detect interference.
Guide to diagnosing intermittent or continuous loss of receiver sensitivity.
Step-by-step instructions for replacing tower-top amplifiers.
Steps for replacing the base amplifier assembly in the MCA.
General
