6
11. Make sure saw guide bar with saw guard is in its lowest position. Close head and base doors.
13. Watch for proper tracking of blade. Back of the blade should be centered in hole in saw guide in stationary
bar (Item No. S119A). Push the toggle switch to stop or press stop button to stop the machine.
15. Contact your local Distributor or BIRO directly if you have any questions or problems with the installation
or operation of this machine.
14. Check placement of all warning labels, wall chart and Manual. Machine is ready for trained operators to
process product.
WARNING LABELS
FOR BIRO POWER MEAT SAWS
Item No. 653PC-SPItem No. 653PC-E
Item No.
708
NOT TO SCALE
Item No. 710
12. Push the toggle switch to start or press start button and check for proper phasing of motor. Blade should be
traveling down through the saw guide.
To Next Page
Loading...
