5
KEEP HANDS CLEAR OF SHARP MOVING BAND TYPE SAW BLADE.
13. Make sure saw guide bar with saw guard is in its lowest position. Close head and base doors.
14. Push the toggle switch to start or press start button. Check for proper phasing of motor and proper tracking of the saw
blade in the saw guides. Back of the blade should be centered in the lower saw guide in the stationary bar. Blade
should be moving down through the guide. Push the toggle to stop or press stop button to stop the machine.
16. Contact your local Distributor or BIRO directly if you have any questions or problems with the installation or
operation of this machine.
15. Check placement of all warning labels, wall chart and Manual. Machine is ready for trained operators to process
product.
WARNING LABELS
FOR BIRO POWER MEAT SAWS
SEE PAGE 27 FOR LOCATIONS ON MACHINE
Item No. 653PC-SPItem No. 653PC-E
Item No.
708
NOT TO SCALE
Item No. 710
To Next Page
Loading...
