Bissell 2007 Series - Assembly; Assembly Safety Warning; Step-by-Step Assembly Guide

www.BISSELL.com
5
4
1
A Phillips-head screwdriver is required for Assembly in Step 3.
2
3 5
Next, align the Carry Handle with the slots
on either side of the base (behind the
Power Button and Cleaning Mode Switch).
The Carry Handle will “click” into place.
First, insert the
(aluminum)
Upper Handle
at the top of the
base until you
hear a “click”.
Do NOT put the
Clean Water
Tank on the
machine until
Step 5.
Use a Phillips-head
screwdriver to secure the
screw (found taped to
Upper Handle) into the
Carry Handle.
Wrap the cord around
the Carry Handle and
Quick Release™ Cord
Wrap hook.
At the bottom of the
Upper Handle, align the
Clean Water Tank with
the grooves and slide
the tank into place.
click
Side
View
Assembly
WARNING
Do not plug in your carpet cleaner until you are familiar with all instructions and operating procedures.