To Next PageTo Next Page
Need help?Do you have a question about the Bissell PROHEAT2X 20B4 and is the answer not in the manual?
General| Heated Drying System | Yes |
|---|---|
| Dual Dirt Tank System | Yes |
| Automatic Mixing | Yes |
| Tank Capacity | 1 gallon |
| Warranty | 3 years limited |
Details on product registration, BISSELL Rewards, faster service, and special promotions.
Essential safety guidelines to follow before and during appliance use to prevent hazards.
Information on proper grounding to reduce electrical shock risk.
Details on recommended BISSELL cleaning formulas and warnings against non-BISSELL solutions.
Step-by-step instructions for assembling the BISSELL ProHeat 2X CleanShot.
Introduction to the machine's special features and built-in heater.
Explanation of automatic cleaning solution mixing based on selected settings.
How to use CleanShot for concentrated spray to tackle tough stains.
Details on the Dry Aire system and the flow indicator for water/solution levels.
Description of the dual tank system for clean and dirty water separation.
Using the ReadyTools dial for floor cleaning or upholstery and stair cleaning.
Information on maintaining carpet warranties with BISSELL formulas.
Instructions on preparing the area and optional pretreating before deep cleaning.
Step-by-step guide to filling tanks and setting up for carpet cleaning.
Detailed steps for cleaning strokes, suction, and tank removal.
Instructions for rinsing the carpet and using the CleanShot feature during cleaning.
How to use the hose and attachments for upholstery, stairs, and furniture.
Instructions for using the Deep Reach tool for targeted stain treatment.
General advice and specific methods for removing carpet stains.
Procedure for cleaning hard floors using the dedicated attachment and formula.
Recommendations for storing the cleaner after use to prevent damage and freezing.
Steps for flushing the machine and cleaning the tank and nozzle.
Instructions for removing and replacing the small brush belt.
Guide for removing and replacing brush rolls and the large belt.
Solutions for when the built-in heater ready light does not illuminate.
Troubleshooting steps for reduced or no spray output.
Diagnosing and fixing issues with the DirtLifter PowerBrush not turning.
Resolving issues with the cleaner not picking up solution or dirty water.
