Bissell PROHEAT PET TURBO User Manual

Product View
1. Spray Trigger
2. Quick Release™
Cord Wrap
3. Power Switch
4. Hose & Tool Holder
5. 2-in-1 Tank
6. Recline Pedal
7. SmartMix® Tank
8. SmartMix Dial
9. Flow Indicator
10. ReadyTools™ Dial
11. Floor Nozzle
12. Belt Access Door
13. DirtLifter
PowerBrush
Go online for a comprehensive walkthrough
of your new purchase!
This guide has everything you need to get ready for first use,
including setting up, using and maintaining your machine,
but online you’ll find additional resources like tips and
troubleshooting, videos, product registration, parts, and more.
Go to support.BISSELL.com.
What’s in the Box? .........................................................3
Cleaning Formulas .........................................................3
Assembly .............................................................................. 4
Before You Clean ............................................................4
Filling the 2-in-1 Tank .................................................... 5
Filling the SmartMix® Tank ........................................ 5
Cleaning Your Floors ....................................................6
Rinsing the Carpet (optional) ................................. 7
Cleaning with the Hose & Attachments ..........8
Emptying the 2-in-1 Tank ...........................................9
After-Cleaning Care ...................................................... 9
Storing Your Machine ................................................. 10
Troubleshooting ............................................................. 10
PROHEAT® PET TURBO
DEEP CLEANER
MODEL 1799V
1
2
3
7
8
4
5
6
9
11
12
13
10

Bissell PROHEAT PET TURBO Specifications

General

Type	Upright
Surface Recommendation	Carpet, Upholstery
Power Rating	6.8 amps
Cleaning Path Width	11 inches
Tank Capacity	1 Gallon
Heatwave Technology	Yes
Cord Length	22 feet
Voltage	120V
Power Source	Corded Electric
Included Tools	3" Tough Stain Tool
Color	Titanium/Red
Special Features	Pet Stain Tool

Summary

Important Safety Instructions

General Warnings

Precautions for reducing the risk of fire, electric shock, or injury when using the appliance.

Grounding Instructions

Ensures appliance is connected to a properly grounded wiring system for electrical safety.

What's in the Box

Cleaning Formulas and Treatments

Primary Cleaning Formulas

BISSELL formulas for general cleaning, stain, and odor removal.

Pretreat and Boost Solutions

Products for spot treatment and enhancing cleaning effectiveness.

Assembly

Assemble Upper Handle and Base

Slide the Upper Handle onto the base and secure with bolts.

Attach Hose & Tool Holder

Feed power cord and align holder with handle, then secure with screws.

Secure Hose & Tool Holder

Use Hex Nuts and bolts to firmly attach the holder to the handle.

Attach Hose and Tools

Connect cleaning tools to the hose and wrap cord and hose.

Before You Clean

Filling the 2-in-1 Tank

Prepare and Fill 2-in-1 Tank

Lay machine down, remove tank, fill bladder with warm water and optional Boost formula.

Secure 2-in-1 Tank Lid

Align lid with tank edges and secure the handle latch.

Filling the SmartMix Tank

Fill SmartMix Tank

Lift SmartMix tank, fill with water and formula to marked lines, and secure the cap.

Cleaning Your Floors

Floor Cleaning Setup

Set Ready Tools Dial to Floor Cleaning and choose a SmartMix setting.

Apply Solution and Extract

Press trigger to dispense solution, then release to suction dirty water.

Rinsing the Carpet (Optional)

Rinse and Dry Pass

Use Water Rinse setting and make wet/dry passes to remove residual water.

Cleaning with Hose & Attachments

Hose Cleaning Setup

Set Ready Tools Dial to Tools, SmartMix to Normal, and attach cleaning tool.

Apply Solution and Extract

Press trigger to spray solution, release to suction; rinse hose and tool after use.

Emptying the 2-in-1 Tank

Remove and Empty Tank

Turn off machine, remove tank, and rotate handle to unlatch and empty.

After-Cleaning Care

Machine Preparation

Turn off, unplug, wrap cord and hose, rinse tank and bladder.

Component Cleaning

Rinse lint screen, flow indicator filter, and clean the Floor Nozzle.

Exterior Maintenance

Wipe machine exterior and vacuum carpet to remove fuzz.

Troubleshooting

Reduced Spray or No Spray Issues

Addresses issues like empty bladder, clogged filter, or pump problems.

DirtLifter PowerBrush Not Turning

Diagnoses problems with brush or pump belts and dial settings.

Reduced Suction or No Suction

Covers tank seating, lid installation, tool position, and full dirty water tank.

Storing Your Machine