Bissell 2007 Series - Filling Your Clean Water Tank; Formula and Water Filling Instructions; Formula Amount Chart; Water & Formula Usage Notes

www.BISSELL.com
6
43
With Formula:
Unscrew the cap from
the tank. Add hot tap
water to the water fill
line. Next, reference
the chart below for
formula amounts to
add to the tank. Twist
cap back into place.
1 2
Lift the tank straight up to remove from
the machine.
The Clean Water Tank is
at the top of the machine.
At the bottom of the Upper Handle, align
the tank with the grooves and slide the
tank into place.
FORMULA FILLING
INSTRUCTIONS
DEEP CLEAN &
MAX CLEAN MODE
EXPRESS CLEAN
MODE
BISSELL® Formulas
• Fill water to the Water Fill Line
next to the DEEP/MAX CLEAN
mode on the Clean Water Tank.
• Fill tank with 2.5 oz of formula.
• For extra cleaning power, fi ll
the formula until it reaches the
“Maximum Formula” line (5 oz).
• Fill water to the Water
Fill Line next to the
EXPRESS CLEAN mode
on the Clean Tank.
• Fill tank with 1.25 oz of
formula.
BISSELL Boost
Formula Enhancers
(Optional)
Add 2.5 oz of BISSELL Boost
formula to the tank for enhanced
cleaning results.
Add 2.5 oz of BISSELL
Boost formula to the tank
for enhanced cleaning
results.
Filling Your Clean Water Tank
Clean Water Tank
(1 Gallon)
Dirty Water Tank
NOTE: Fill with hot (140°F/60°C MAX) tap water and add the appropriate BISSELL
formula. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN
MICROWAVE. Do not substitute BISSELL cleaning formula with other household
cleaning products.