4. Step on the back of the foot to recline the body of machine to begin cleaning.
5. Push the trigger on the handle to release steam.
6. To be sure to sanitize an area of your floor, use the microfiber cloth pad and slowly and evenly
stroke your steam mop back and forth at least three times over the area using continuous steam.
For best results, remove the pad and wash after use.
7. For optimum corner cleaning, perform two cleaning strokes along each wall towards the corner to
be cleaned.
When done cleaning, unplug the machine.
NOTE: Upon the first use of your steam mop or first use after refilling the water tank, the pump may
make a “knocking” sound. This is normal and will diminish after a few seconds.
NOTE: The steam mop generates hot steam, so move the unit continuously when depressing the
To Next Page
Loading...
