4. Fill water tank with distilled or demineralized water, recommended in place of tap water. Place
the nozzle back into the water tank after filling and return tank to machine.
A few notes about filling the Water Tank:
The Water Tank’s capacity is 300 mL (10 oz). DO NOT USE CHEMICALS IN THE WATER TANK
OF YOUR POWEREDGE™ LIFT-OFF® STEAM MOP.
TIP: Use of distilled water or demineralized water is recommended to prolong the life of your hard
floor cleaner.
Cleaning Your Hard Floors
NOTE: Before you clean, thoroughly sweep or vacuum floor prior to cleaning with your PowerEdge™
Lift-Off® Steam Mop. Your hard floor cleaner is designed to clean hard flooring, such as ceramic tile,
marble, stone and sealed hard wood floors. Use on waxed or some unwaxed floors may result in a
diminished glossiness. The hard floor cleaner is not for use on unsealed wood floors. For best results,
test in an inconspicuous area and check the care instructions from your flooring manufacturer.
1. Attach mop pad by wrapping around bottom of foot, making sure gray stitching is located on the
front of foot and the Quick Grip Release Tab is located on the back.
2. Plug machine into an outlet.
3. When the machine is plugged in, the READY light will start to blink. The READY light will turn to a
solid light when the machine is ready to use.
To Next Page
Loading...
