8
www.BISSELLdirect.co.uk
3.
2.
4.
Power
Detent
2.
1.
4.3.
Fill the tank
1. Remove the solution tank by lifting it straight
up, then away from the lower body.
2. Unscrew the black cap at the bottom of the
solution tank.
3. Fill with hot (not boiling) tap water
(140°F/60°C MAX) to the WATER line. Fill the
rest of the tank with BISSELL 2X Formula to the
FORMULA line. Replace and tighten the black cap.
Caution: Do not microwave or boil water
before filling.
4. Place solution tank on lower body.
Carpet washing
1. Plug into proper outlet.
2. Adjust the retractable handle by turning
counterclockwise and lifting the handle up.
Turn clockwise to secure.
3. With foot, push the red power pedal,
located on the back of the machine.
NOTE: Handle must be in the full upright
position before use.
4. With foot, push the grey detent pedal.
located next to power button.
5. Cleaning Passes. While pressing the
trigger, make one slow forward wet pass and
another one back.
Caution: Do not overwet.
6. Release the trigger and make one slow
forward and backward pass over the same
area.
7. Repeat steps 5 and 6 until solution being
pulled up appears clean.
8. Empty the collection tank when dirty water
reaches the full line, or when the solution tank
is empty.
Operatis
To Next Page
Loading...
