The BISSELL HydroClean ProHeat Complete (Model 1474J) is a versatile multi-function water filtration vacuum designed for comprehensive home cleaning. This innovative appliance combines the power of a water filtration vacuum with the deep cleaning capabilities of a wet cleaner, offering a complete solution for various floor and upholstery types.
Function Description:
The HydroClean ProHeat Complete operates in two primary modes: Water Filter Vacuum Mode and Wet Clean Mode.
-
Water Filter Vacuum Mode: In this mode, the cleaner utilizes a water filtration system to trap dirt and allergens, providing a deeper and cleaner vacuuming experience compared to traditional bag or bagless vacuums. The collection tank must be filled with clean tap water to the "clean water fill line" for proper operation. This mode is ideal for dry vacuuming carpets, rugs, and hard floors, effectively capturing dust, pet hair, and other debris within the water, preventing them from recirculating into the air. It is crucial never to operate the cleaner in Filter Vac mode without clean tap water in the collection tank, as this can damage the motor.
-
Wet Clean Mode: This mode transforms the appliance into a powerful deep cleaner for carpets, rugs, upholstery, and sealed hard floors. It incorporates BISSELL's Heatwave Technology™, which helps maintain the temperature of the hand hot tap water added to the solution tank, ensuring consistent heat for effective cleaning. In Wet Clean mode, the cleaner dispenses a mixture of water and BISSELL cleaning formula onto the surface, agitates the dirt, and then suctions away the dirty solution, leaving surfaces clean and refreshed. Specific BISSELL formulas are recommended for different surfaces (carpet/upholstery or hard floors) to ensure optimal results and prevent damage to the machine or voiding the guarantee.
Important Technical Specifications:
- Power Supply: 220-240 Volt A.C. 50-60 Hz. This model is designed for household use only.
- Water Filtration System: Utilizes water in the collection tank to filter dust and allergens during dry vacuuming.
- Heatwave Technology™: Maintains the temperature of hot tap water during wet cleaning for enhanced cleaning performance.
- Cleaning Formulas: Specifically designed to work with BISSELL 2X Wash & Protect Pet Stain & Odour Formula with Scotchgard™ Protection (1.5 L) for carpets and upholstery, and BISSELL Wash & Shine Hard Floor Cleaner (1 L) for sealed hard floors. Using non-BISSELL formulas may harm the cleaner and void the guarantee.
- Double Insulation: The appliance is provided with double insulation, requiring only identical replacement parts if service is needed.
Usage Features:
- Easy Assembly: The hose, solution hose, and wand pieces attach with a simple twist-and-lock mechanism. Tools attach to the lower wand or directly to the grip for smaller accessories.
- Cleaning Mode Selector: A clearly marked selector allows users to switch between "FILTER VAC" and "WET CLEAN" modes.
- Quick Release™ Hose Door: Facilitates easy access for attaching and detaching the hose and collection tank.
- Collection Tank: Removable for easy filling, emptying, and rinsing. It has a "clean water fill line" for water filtration mode and a float mechanism that shuts off suction when full to prevent overfilling.
- Solution Tank: Removable, with a measuring cap for precise mixing of water and cleaning formula. It should never be empty or missing when operating in Wet Clean mode.
- Wand and Grip: Provides extended reach for cleaning floors and high-up areas. Tools can be attached to the end of the wand or directly to the grip.
- Spray Trigger: Located on the grip, it controls the release of cleaning solution during wet cleaning.
- Power Button and Wet Clean Button: Separate buttons for powering on the machine and activating the wet clean function.
- Tool Caddy: Attaches to the back of the cleaner for convenient storage of vacuuming tools or is replaced by the solution tank for wet cleaning.
- Included Cleaning Tools (A-4):
- TurboBrush Vacuum Tool with Air Flow Regulator (35): For enhanced dry vacuuming on various surfaces.
- Multi-Surface Vacuum Tool (36): A general-purpose vacuuming tool.
- Deep Clean Carpet Washing Tool with Removable Nozzle (37): Designed for thorough carpet and rug cleaning, with a removable nozzle for easy cleaning.
- Quick Dry Hard Floor Tool with Washable Microfibre Mop Pad (38): For wet cleaning sealed hard floors, featuring a microfibre mop pad that attaches with Velcro strips.
- Tool Caddy (39): For organizing accessories.
- Dusting Brush (40): For delicate surfaces.
- Upholstery Tool (41): For cleaning upholstered furniture.
- Wet and Dry Crevice Tool (42): For reaching tight spaces.
- Upholstery Deep Cleaning Tool (43): For deep cleaning upholstery.
- Drain Cleaner (44): A specialized tool.
- Microfibre Mop Pads (45): Washable and reusable pads for the hard floor tool.
- Pre-Motor Filter (46) & Post-Motor Filter (47): Essential for filtration, requiring regular cleaning or replacement.
- Tool Storage Bag (48): For convenient storage of all tools.
- Upholstery Cleaning Precautions (C-4): Important guidelines for checking upholstery tags ("W" or "WS" codes), colourfastness, and stuffing before wet cleaning to prevent damage.
- Hard Floor Cleaning Precautions (C-5): Instructions for using the Quick Dry Hard Floor Tool with a microfibre mop pad, ensuring the pad is positioned correctly and avoiding oversaturation.
Maintenance Features:
- Collection Tank Care (D-1): After each use, the collection tank should be removed, emptied of dirty water, rinsed, and air-dried.
- Cleaning Mode Selector and Water Filtration Tower Care (D-1): These components are removable for thorough rinsing and air-drying. Specific instructions are provided for removal and reassembly, ensuring proper alignment and locking.
- Tool Cleaning (D-1): All tools used for wet cleaning should be rinsed with clean tap water and allowed to air dry completely before storage. The nozzle of the carpet deep cleaning tool is removable for more thorough cleaning, requiring a Phillips head screwdriver for disassembly and reassembly.
- Pre-Motor Filter Maintenance (D-2): Located in the top lid, the foam pre-motor filter should be inspected regularly. If dirty, it can be rinsed with clean tap water and air-dried completely before being reinserted into the separator.
- Post-Motor Filter Maintenance (D-2): Accessed by opening the filter door, the post-motor filter should be checked. If dirty, it can be replaced with a new filter or rinsed under clean tap water and air-dried. It is crucial to ensure the filter door is fully closed and latched before operating the machine.
- Machine Storage (D-3): The unit should be stored in a protected, dry area at room temperature (4° to 43° C). The Quick Release cable wrap allows for easy storage of the power cable.
- Warning against Freezing (NOTICE): Do not store the unit where freezing may occur, as damage to internal components may result.
- Float Installation (WARNING): Always install the float before any wet pick-up operation to prevent fire and electric shock risks.
- Filter Condition (WARNING): Do not operate the cleaner with damp or wet filters or without all filters in place.
The BISSELL HydroClean ProHeat Complete is backed by a Limited 2 Year Guarantee, provided the product is used for personal domestic purposes and according to the user guide. Consumable components like filters, belts, and mop pads are not covered.
Need help?
General
To Next Page