Need help?Do you have a question about the Bissell CrossWave 1785 and is the answer not in the manual?
General| Brand | Bissell |
|---|---|
| Model | CrossWave 1785 |
| Category | Ultrasonic Jewelry Cleaner |
| Language | English |
Key precautions to reduce fire, electric shock, and injury risks when using the appliance.
Requirements for connecting the appliance to a grounded wiring system to prevent electrical shock.
Identifies and labels the key parts of the CrossWave machine with numbered diagrams.
Instructions for assembling the handle, water tank, and cord wraps for the unit.
Details on available cleaning formulas for multi-surface, wood floors, and area rugs.
Detailed steps for filling the clean water tank with water and appropriate cleaning formula.
Instructions for cleaning hard floors, including mode selection and solution application.
Instructions for cleaning area rugs, including mode selection and wet/dry passes.
Warning against overwetting carpet and potential damage from belt stalling.
Steps to remove, empty, and rinse the dirty water tank and its components.
Instructions for hand washing the vacuum filter and rinsing the float.
Instructions for removing, rinsing, and cleaning the brush roll and brush chamber.
Steps for correctly reinstalling the brush roll and brush roll window.
Procedure for using the storage tray to clean the brush roll.
Steps to remove the brush roll and place it in the drying tray.
Recommendations for storing the cleaner in a protected, dry area, avoiding freezing.
Possible causes and remedies for lack of spray or weak spray.
Causes and solutions for reduced or lost suction power.
Troubleshooting steps when the brush roll fails to spin.
Reasons and fixes for the machine not powering on.
Causes and remedies for the machine experiencing leaks.
To Next Page