EasyManua.ls Logo

Bissell SPINWAVE 2307 - User Manual

Bissell SPINWAVE 2307
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SPINWAVE
®
CORDLESS
_______________
USER GUIDE
2307, 2315 SERIES

Questions and Answers

  • P
    patelbrookeJul 27, 2025
    What to do if all three LED lights are flashing on my Bissell SpinWave?
    • A
      Alan WeberJul 27, 2025
      If all three LED lights are flashing on your Bissell SpinWave, it could be due to a couple of reasons. One possibility is that the pads were forced to stop spinning, perhaps because of stuck debris, being compressed under furniture, or briefly stepped on. To fix this, turn the unit off or wait 10 seconds for it to turn OFF automatically, then press the ON/OFF button to restart it. Another reason could be heavy and extended use, causing the internal temperature to rise slightly above normal. In this case, press the power button once and wait for the unit to cool down and reset.
  • D
    Debra ClarkAug 1, 2025
    How to fix Bissell SpinWave that won't charge?
    • A
      Alyssa MoralesAug 1, 2025
      If your Bissell SpinWave unit will not charge, start by checking the charger connection. Make sure the charger plug is fully inserted into the wall outlet and that the charging cord is completely plugged into the port on the back of the unit. Also, ensure you are using the correct charger, specifically the one that came with the machine.
  • S
    scott50Aug 6, 2025
    Why are the spin plates not turning on my Bissell SpinWave?
    • B
      Brian MorrisAug 6, 2025
      If the spin plates on your Bissell SpinWave are not turning or are wobbling, it could be due to improper installation of the mop pads. Turn the power OFF and follow the instructions for replacing the mop pads. Another reason could be that the machine is standing upright. To resolve this, recline the machine.
  • A
    Ashley IngramAug 11, 2025
    Why is my Bissell SpinWave not spraying?
    • C
      Casey WellsAug 11, 2025
      If the Bissell SpinWave is not spraying, several factors could be at play. First, ensure the Clean Water Tank is filled to capacity. If it is empty, refill it. Secondly, check that the Clean Water Tank is correctly seated. If not, turn the power OFF and reseat the tank. Also, the system may need priming; hold the trigger for 10 to 15 seconds to allow the solution to reach the spray tips. Remember to hold the trigger continuously during use. Lastly, clogged spray tips can cause this issue. To resolve this, turn the power OFF and use a pin to clean the spray tip located at the front and center of the machine.
  • L
    Leonard ParkerAug 16, 2025
    What to do if my Bissell SpinWave is leaking?
    • A
      Alan HullAug 17, 2025
      If your Bissell SpinWave is leaking, the cap of the Clean Water Tank may not be closed properly. Remove the Clean Water Tank and re-apply the cap, ensuring it is securely fastened.
  • J
    James VillanuevaAug 21, 2025
    How to stop my Bissell SpinWave from vibrating?
    • J
      jeremymartinezAug 21, 2025
      If your Bissell SpinWave unit is vibrating or wobbling, it is possible that the mop pads are not aligned correctly with the foot. Realign the mop pads on the foot to resolve this issue.

Summary

IMPORTANT SAFETY INSTRUCTIONS

Whats In The Box?

Get to Know Your SpinWave Cordless

Assembly

Cleaning Formulas

Charging the Battery

In Use LED Display

Attaching Mop Pads: Option 1

Attaching Mop Pads: Option 2

Filling Your Clean Water Tank

Cleaning Sealed Hard Floors

Cleaning Sealed Hard Floors (contd)

Cleaning Your SpinWave Cordless

Disposing the Batteries

Troubleshooting

Warranty

Register your product today!

Overview

The BISSELL SpinWave Cordless is a hard surface floor cleaner designed for household use, offering a convenient and effective way to clean sealed hard floors. It is a cordless device, providing freedom of movement without being tethered to an electrical outlet. The cleaner utilizes rotating mop pads and a cleaning solution to tackle dirt and messes.

Function Description:

The SpinWave Cordless is primarily used for wet cleaning of sealed hard floors such as hardwoods and laminate. It dispenses a cleaning solution onto the floor and then uses two rotating mop pads to scrub and clean the surface. The device is designed to be user-friendly, with digital controls and battery status indicator lights to keep the user informed about its operation and power level. It is not intended for use on carpets or rugs.

Important Technical Specifications:

  • Power Source: Lithium-ion rechargeable battery.
  • Charging Time: Approximately 4 hours for maximum run time.
  • Battery Status Indicators: Three blue LED lights indicate battery charge level (100-67%, 66-33%, 32-10%, >10% flashing, 0%).
  • Water Temperature: Fill with warm tap water (140°F/60°C MAX); do not use boiling water or heat the tank in a microwave.
  • Cleaning Formulas: Specifically designed for use with BISSELL SpinWave Cordless formulas (Multi-Surface and Wood Floor formulas are mentioned). Other solutions may harm the machine and void the warranty.
  • Storage Temperature: Keep the temperature range between 40-104°F when charging, storing, or using the unit.

Usage Features:

  • Cordless Operation: Provides flexibility and ease of use without a power cord.
  • Digital Controls: Simple interface for operating the device.
  • Spray Nozzle: Dispenses cleaning solution directly onto the floor. A soft buzzing noise indicates solution is being dispensed.
  • Two Types of Mop Pads:
    • Soft Touch Pads: Ideal for everyday use on delicate flooring like sealed hardwoods and laminate.
    • Scrubby Pads: Designed for tackling tough, sticky messes.
  • Easy Mop Pad Attachment: Pads can be attached by aligning them with the inner ring on the foot and securing them to the hook and loop material, or by placing them in the storage tray and hovering the unit over them.
  • Clean Water Tank: Located on the front of the machine, it can be easily removed, filled with water and cleaning formula, and reattached. The tank has two measuring volumes for small and large area cleaning.
  • Low Profile Foot: Allows for cleaning in tight spaces and under furniture.
  • Carry Handle: For easy transport of the unit.
  • Upright Standby Mode: If the unit is on and placed in an upright position, it will enter standby mode and turn off automatically after 10 seconds of no action.
  • Optimized Cleaning Strokes: For best results, overlapping cleaning strokes are recommended while dispensing solution. Care should be taken not to overwet delicate floor surfaces.
  • Edge Cleaning: The unit may exhibit a slight pull when cleaning near baseboards, edges, or furniture due to bouncing off the surface.

Maintenance Features:

  • Mop Pad Cleaning: Mop pads are machine washable in warm water with liquid detergents. Do not use bleach or fabric softener. Tumble dry on low, do not iron, and do not dry clean.
  • Clean Water Tank Emptying: Any remaining solution in the Clean Water Tank should be emptied prior to storing the machine.
  • Storage: Store the unit upright in its storage tray in a dry, protected area with dry mop pads. Storing with wet mop pads or in freezing temperatures can damage the machine and delicate floors.
  • Troubleshooting: The manual provides a comprehensive troubleshooting guide for common issues such as vibrating/wobbling, reduced spray, non-rotating spin plates, leaking, charging problems, and LED light indicators.
  • Battery Disposal: The device contains lithium-ion rechargeable batteries, which require proper removal and disposal according to Federal and State regulations. Instructions are provided for disconnecting the battery pack, involving the use of screwdrivers and rubber-handled wire cutters. The RBRC (Rechargeable Battery Recycling Corporation) is recommended for disposal.
  • Charger: Only use the charger supplied by the manufacturer to recharge the unit.
  • Cleaning Spray Tips: If spray tips on the foot become clogged, they can be cleaned with a pin.

The BISSELL SpinWave Cordless is designed for efficient and convenient hard floor cleaning, emphasizing ease of use, effective cleaning, and proper maintenance for longevity.

Bissell SPINWAVE 2307 Specifications

General IconGeneral
BrandBissell
ModelSPINWAVE 2307
CategoryUltrasonic Jewelry Cleaner
LanguageEnglish

Related product manuals