EasyManua.ls Logo

Bissell SPINWAVE 2315 - User Manual

Bissell SPINWAVE 2315
16 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SPINWAVE
®
CORDLESS
_______________
USER GUIDE
2307, 2315 SERIES

Table of Contents

Questions and Answers

  • S
    Samantha HunterAug 7, 2025
    What to do if all three LED lights are flashing on my Bissell SpinWave?
    • D
      Dawn DavisAug 7, 2025
      If all three LED lights are flashing on your Bissell SpinWave, it could be due to a couple of reasons. One possibility is that the pads were forced to stop spinning, perhaps because of stuck debris, being compressed under furniture, or briefly stepped on. To fix this, turn the unit off or wait 10 seconds for it to turn OFF automatically, then press the ON/OFF button to restart it. Another reason could be heavy and extended use, causing the internal temperature to rise slightly above normal. In this case, press the power button once and wait for the unit to cool down and reset.
  • A
    Anita GreenAug 12, 2025
    How to fix Bissell SpinWave that won't charge?
    • L
      Laura AndersonAug 12, 2025
      If your Bissell SpinWave unit will not charge, start by checking the charger connection. Make sure the charger plug is fully inserted into the wall outlet and that the charging cord is completely plugged into the port on the back of the unit. Also, ensure you are using the correct charger, specifically the one that came with the machine.
  • M
    Matthew HughesAug 17, 2025
    Why are the spin plates not turning on my Bissell SpinWave?
    • S
      Sherry WilliamsAug 17, 2025
      If the spin plates on your Bissell SpinWave are not turning or are wobbling, it could be due to improper installation of the mop pads. Turn the power OFF and follow the instructions for replacing the mop pads. Another reason could be that the machine is standing upright. To resolve this, recline the machine.
  • D
    Dr. John RodriguezAug 22, 2025
    Why is my Bissell SpinWave not spraying?
    • T
      Travis CarsonAug 22, 2025
      If the Bissell SpinWave is not spraying, several factors could be at play. First, ensure the Clean Water Tank is filled to capacity. If it is empty, refill it. Secondly, check that the Clean Water Tank is correctly seated. If not, turn the power OFF and reseat the tank. Also, the system may need priming; hold the trigger for 10 to 15 seconds to allow the solution to reach the spray tips. Remember to hold the trigger continuously during use. Lastly, clogged spray tips can cause this issue. To resolve this, turn the power OFF and use a pin to clean the spray tip located at the front and center of the machine.
  • S
    sean20Aug 27, 2025
    What to do if my Bissell SpinWave is leaking?
    • L
      Laura HopkinsAug 27, 2025
      If your Bissell SpinWave is leaking, the cap of the Clean Water Tank may not be closed properly. Remove the Clean Water Tank and re-apply the cap, ensuring it is securely fastened.
  • J
    Jessica JacksonSep 1, 2025
    How to stop my Bissell SpinWave from vibrating?
    • B
      Blake HopkinsSep 1, 2025
      If your Bissell SpinWave unit is vibrating or wobbling, it is possible that the mop pads are not aligned correctly with the foot. Realign the mop pads on the foot to resolve this issue.

Summary

Important Safety Instructions

Whats In The Box?

Get to Know Your SpinWave Cordless

Assembly

Cleaning Formulas

Charging the Battery

In Use LED Display

Attaching Mop Pads: Option 1

Attaching Mop Pads: Option 2

Filling Your Clean Water Tank

Cleaning Sealed Hard Floors

Cleaning Your SpinWave Cordless

Disposing the Batteries

Troubleshooting

Warranty

Service

Bissell SPINWAVE 2315 Specifications

General IconGeneral
BrandBissell
ModelSPINWAVE 2315
CategoryUltrasonic Jewelry Cleaner
LanguageEnglish

Related product manuals