To Next PageTo Next PageWhat to do if the dirty water tank icon is flashing on my Bissell CROSSWAVE HF3 3649 Cleaning Equipment?
If the dirty water tank icon is flashing, it means the tank is either full or not installed correctly. Remove, empty, and then reinstall the tank to resolve this issue.
Why does my Bissell CROSSWAVE HF3 3649 have reduced or no suction?
Reduced or no suction in your Bissell Cleaning Equipment can be caused by a blocked suction path (clean the suction path) or a brush roll entangled with hair and other objects (clean the brush roll).
Why is my Bissell CROSSWAVE HF3 3649 Cleaning Equipment not working?
Your Bissell Cleaning Equipment might not be working due to several reasons: the dirty water tank may be full or not seated properly (empty and reseat the tank); the brush roll window might not be latched (reinstall the brush roll window); or the machine isn't reclined (recline it before pressing the power button).
What to do if my Bissell CROSSWAVE HF3 3649 can’t complete the self-cleaning cycle?
If your Bissell Cleaning Equipment can’t complete the self-cleaning cycle, it could be due to a low battery (fully charge it before use), an empty clean water tank (refill the tank), or a full dirty water tank (empty the tank).
Why is the self-cleaning cycle button flashing on my Bissell CROSSWAVE HF3 3649 Cleaning Equipment?
The self-cleaning cycle button might be flashing because the cleaning cycle was interrupted by a full dirty water tank. To fix this, remove, empty, and then reinstall the tank.
Why is the brush roll icon flashing on my Bissell Cleaning Equipment?
The brush roll icon flashes because the brush roll is entangled with hair or other objects. Clean the brush roll to resolve this.
Why is my Bissell CROSSWAVE HF3 3649 Cleaning Equipment making abnormal noises?
Abnormal noise during motor operation in your Bissell Cleaning Equipment is often due to a blocked suction path. Cleaning the suction path should resolve this.
Why is my Bissell CROSSWAVE HF3 3649 Cleaning Equipment not charging?
If your Bissell Cleaning Equipment isn’t charging, check the adapter connection to the charging base. Ensure it is properly connected.
General| Category | Cleaning Equipment |
|---|---|
| Surface Type | Hard Floors and Area Rugs |
| Power Source | Battery |
| Battery Type | Lithium-Ion |
| Charge Time | 4 hours |
| Weight | 11.5 lbs |
| Cleaning Path Width | 10.5 inches |
| Voltage | 36V |
| Cord Length | Cordless |
| Width | 10.5 inches |
| Height | 46 inches |
| Model | 3649 Series |
| Features | Multi-Surface Cleaning, Self-Cleaning Cycle |
| Type | Wet/Dry Vacuum |
Instructions for cleaning hard nonporous floors using the Hard Floor Sanitize formula.
