Bissell ICONPET 2288 Series User Manual

Bissell ICONPET 2288 Series

12 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Go online for a comprehensive walkthrough

of your product!

This guide has everything you need to get ready for first use,

including setting up, using and maintaining your machine,

but online you’ll find additional resources like tips and

troubleshooting, videos, product registration, parts and more.

Go to support.BISSELL.com.

ICONPET® CORDLESS VACUUM

MODEL SERIES 2288, 2774

Table of Contents

Questions and Answers:

A
Angela EvansAug 5, 2025
Why won't my Bissell ICONPET 2288 Vacuum Cleaner pick up dirt?
- B
  Beth SantiagoAug 5, 2025
  Your Bissell Vacuum Cleaner might not be picking up dirt due to several reasons. First, the filters could be dirty. Try removing and rinsing the pre-motor filters, ensuring they dry completely before reinserting them. Also, remove and dust off the post-motor filter. Second, there might be a clog in the vacuum. Detach the foot and Extension Wand from the hand vacuum to inspect and clear any debris. Finally, the Dirt Tank might not be seated correctly; remove and reseat it properly.
J
Jessica SweeneyAug 12, 2025
Why Bissell ICONPET 2288 Vacuum Cleaner won’t pick up dirt?
- A
  Autumn JohnsonAug 12, 2025
  Your Bissell Vacuum Cleaner may not be picking up dirt due to several reasons. First, the filters might be dirty. Remove and rinse the Pre-Motor Filters, and allow them sufficient time to dry before reinserting. Also, remove and dust off the post-motor filter. Second, there might be a clog in the vacuum. Remove the foot and extension wand from the hand vacuum and check for debris buildup or clogs. Clear any obstructions before reassembling. Finally, the dirt tank might not be seated correctly. Remove the tank and reseat it properly.
A
Angela Cochran MDAug 17, 2025
What to do if dirt is escaping from my Bissell ICONPET 2288?
- P
  peterssusanAug 18, 2025
  If dirt is escaping from your Bissell Vacuum Cleaner, it could be due to a few reasons. The Dirt Tank might be full, so try emptying it. Also, the filters might be missing or dirty; check to ensure the pre- and post-motor filters are in place and clean them if needed. Finally, there could be a clog in the vacuum. Remove the foot and Extension Wand from the hand vacuum and check for any blockages.
A
Andre GonzalezAug 23, 2025
What to do if dirt is escaping from Bissell ICONPET 2288 Vacuum Cleaner?
- P
  Peter BennettAug 23, 2025
  If dirt is escaping from your Bissell Vacuum Cleaner, there are a few potential causes. The dirt tank might be full, so empty it. Also, the filters might be missing or dirty; check to see if the Pre-Motor & Post Motor Filters are in place and clean them if necessary. Finally, there might be a clog in the vacuum. Remove the foot and extension wand from the hand vacuum, check for debris buildup or clogs, and clear any obstructions before reassembling.
J
Jasmine FrancoAug 29, 2025
How to fix Bissell ICONPET 2288 that won’t charge?
- K
  Kathleen PorterAug 29, 2025
  If your Bissell Vacuum Cleaner isn’t charging, ensure you are using the charger that came with the machine. Also, check that the charger is properly plugged into the hand vacuum; try removing and reinstalling it.

Bissell ICONPET 2288 Series Specifications

General

Type	Cordless Stick Vacuum
Model Number	2288 Series
Power Source	Battery
Battery Life	50 minutes
Filtration	SmartSeal Allergen System
Brush Roll	Tangle-Free Brush Roll
Cord Type	Cordless
Charging Time	4 hours
Warranty	2-Year Limited Warranty
Included Accessories	crevice tool, Dusting Brush
Surface Recommendation	Carpet, Hard Floors
Special Features	LED Lights

Summary

Important Safety Instructions

What's in the Box?

Getting to Know Your Vacuum

Product View

Diagram labeling the components of the cordless vacuum cleaner.

Assembly

Installing the Wall Storage & Charging Station

Charging the Battery

Charging with the Hand Vacuum

Instructions for charging the vacuum directly using the charger and hand unit.

Charging with the Wall Storage & Charging Station

Instructions for charging the vacuum using the mounted wall storage station.

Using the Vacuum

Using the Parking Brake

Attaching Tools for Hand Vac Use

Emptying the Dirt Tank

Removing the Brush Roll

Cleaning & Replacing the Filters

Pre-Motor Filters

Instructions for cleaning the pre-motor filter after each use.

Post-Motor Filter

Instructions for cleaning the post-motor filter.

Troubleshooting

Vacuum won't pick up dirt

Addresses issues where the vacuum is not picking up dirt effectively.

Dirt is escaping from the vacuum

Covers causes and remedies for dirt leaking from the vacuum.

Vacuum won't charge

Provides solutions for the vacuum failing to charge.

Warranty

Related product manuals

Preview: Bissell ICONpet 22883

Bissell ICONpet 22883

Preview: Bissell ICONPET PRO 2746 Series

Bissell ICONPET PRO 2746 Series

Preview: Bissell ICONPET 3178 Series

Bissell ICONPET 3178 Series

Bissell ICON Series

Preview: Bissell ADAPT ION

Bissell ADAPT ION

Preview: Bissell FLIP-IT 5200

Bissell FLIP-IT 5200

Preview: Bissell 3-IN-1 2030 Series

Bissell 3-IN-1 2030 Series

Bissell 3-IN-1 3346 Series

Preview: Bissell 3-IN-1 VAC 38B1 SERIES

Bissell 3-IN-1 VAC 38B1 SERIES

Preview: ADAPT ION PET 2286 SERIES

ADAPT ION PET 2286 SERIES

Preview: ADAPT ION XRT 3034 Series

ADAPT ION XRT 3034 Series

Preview: 3-IN-1 VAC 38B1/1059 SERIES

3-IN-1 VAC 38B1/1059 SERIES