To Next PageTo Next PageWhy does my Bissell Vacuum Cleaner lose suction power?
If your Bissell Vacuum Cleaner loses suction power, it might be due to a few reasons. First, check the Dirty Water Tank and empty it if it's full. Second, ensure the Brush Roll Nozzle is correctly latched in place by turning the power off, unplugging the machine, and reinstalling it. Lastly, make sure both tanks are properly seated on the machine by removing and reseating them.
What to do if my Bissell JETSCRUB PET 2529 Vacuum Cleaner has reduced spray or no spray?
If your Bissell Vacuum Cleaner isn't spraying, several factors could be at play. Begin by checking if the Clean Water Tank is empty and refill it if needed. Ensure the Clean Water Tank is completely seated. Prime the system by holding the Spray Trigger for 10 to 15 seconds. Also, verify that the Brush Roll Nozzle is correctly latched. Finally, remember to hold the trigger continuously while using the machine to spray solution.
Why does my Bissell Vacuum Cleaner shut off unexpectedly?
If your Bissell Vacuum Cleaner shuts off unexpectedly, a possible cause is a tripped circuit breaker due to a brushroll blockage. To resolve this, unplug the machine and inspect the Brush Roll for any foreign objects. Remove any obstructions and ensure the Brush Roll spins freely. Then, plug the machine back in. Avoid stepping on or applying pressure to the Brush Roll Nozzle while operating the machine.
General| Brand | Bissell |
|---|---|
| Model | JETSCRUB PET 2529 Series |
| Category | Vacuum Cleaner |
| Language | English |
Crucial safety guidelines and precautions for operating the appliance.
Details on how to properly ground the appliance for electrical safety.
