How to fix a Bissell Vacuum Cleaner that won’t run?
If your Bissell Vacuum Cleaner isn’t running, there are a couple of things to check: First, make sure the power cord is properly plugged into the electrical outlet. Second, check your home's fuse or breaker. If a fuse is blown, replace it. If a breaker is tripped, reset it.
What to do if my Bissell Powerforce Helix 1700 Vacuum Cleaner won't pick up dirt?
There are several reasons why your vacuum might not be picking up dirt. Start by emptying the dirt container if it's full. Then, check the filter and clean or remove any debris. Make sure the hose and dirt container are securely in place, listening for a click. Inspect the air passageway, hose inlet, and hose for clogs. Also, check the rotating power brush drive belt for damage and replace if needed. Examine the floor brush for worn bristles or jams; clean or replace as necessary.
General| Brand | Bissell |
|---|---|
| Model | Powerforce Helix 1700 Series |
| Category | Vacuum Cleaner |
| Language | English |
Covers essential precautions like not leaving plugged in, avoiding wet surfaces, and proper cord handling.
Emphasizes saving instructions and explains the polarized plug for safety.
Crucial safety warnings before performing maintenance.
Lists possible causes and remedies for the vacuum not starting.
Lists possible causes and remedies for poor suction.
Important safety warning before troubleshooting.
To Next Page