How to fix a Bissell Vacuum Cleaner that won’t run?
If your Bissell Vacuum Cleaner isn’t running, there are a couple of things to check: First, make sure the power cord is properly plugged into the electrical outlet. Second, check your home's fuse or breaker. If a fuse is blown, replace it. If a breaker is tripped, reset it.
What to do if my Bissell Powerforce Helix 1701 Vacuum Cleaner won't pick up dirt?
There are several reasons why your vacuum might not be picking up dirt. Start by emptying the dirt container if it's full. Then, check the filter and clean or remove any debris. Make sure the hose and dirt container are securely in place, listening for a click. Inspect the air passageway, hose inlet, and hose for clogs. Also, check the rotating power brush drive belt for damage and replace if needed. Examine the floor brush for worn bristles or jams; clean or replace as necessary.
Why won't my Bissell Powerforce Helix 1701 pick up dirt?
Several factors can cause this. The dirt container might be full, so empty it. The filter could be dirty, so check it and remove any debris or clean it. The hose might not be secure; ensure it's snapped into place at both ends. The dirt container might not be properly in place; remove it and secure it until you hear a click. There could be a clog in the vacuum path; visually inspect the air passageway, hose inlet, and hose for obstructions and carefully remove them. The rotating power brush drive belt might be broken; replace it. The drive belt might be stretched; check the drive belt area, remove obstructions, and replace the drive belt if necessary. The floor brush bristles might be worn; replace the floor brush. The floor brush might be jammed; remove the floor brush and clean debris fr...
General| Brand | Bissell |
|---|---|
| Model | Powerforce Helix 1701 Series |
| Category | Vacuum Cleaner |
| Language | English |
Ensures correct and safe connection of the vacuum cleaner's polarized plug.
Instructions on how to adjust cleaner height for various floor types.
Step-by-step guide for maintaining the TurboBrush accessory.
To Next Page