How to fix a Bissell POWERFORCE HELIX 2110 Vacuum Cleaner that won’t run?
If your Bissell Vacuum Cleaner isn’t running, there are a couple of things to check: First, make sure the power cord is properly plugged into the electrical outlet. Second, check your home's fuse or breaker. If a fuse is blown, replace it. If a breaker is tripped, reset it.
What to do if my Bissell POWERFORCE HELIX 2110 won't pick up dirt?
There are several reasons why your vacuum might not be picking up dirt. Start by emptying the dirt container if it's full. Then, check the filter and clean or remove any debris. Make sure the hose and dirt container are securely in place, listening for a click. Inspect the air passageway, hose inlet, and hose for clogs. Also, check the rotating power brush drive belt for damage and replace if needed. Examine the floor brush for worn bristles or jams; clean or replace as necessary.
General| Product Type | Upright Vacuum Cleaner |
|---|---|
| Model | 2110 Series |
| Weight | 12.5 lbs |
| Filtration | Multi-level filtration |
| Cord Length | 25 feet |
| Cleaning Path Width | 12 inches |
| Hose Length | 6 ft |
| Onboard Tools | Crevice tool |
| Filter Type | Washable foam and felt filter |
To Next Page