Bissell POWERLIFTER 1309 SERIES User Manual

Bissell POWERLIFTER 1309 SERIES

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

POWERLIFTER

®

USER GUIDE

1309 SERIES

*Product images may vary

Table of Contents

Questions and Answers:

K
Kathleen CooperJul 27, 2025
Why won't my Bissell POWERLIFTER 1309 turn on?
- J
  John BenderJul 27, 2025
  Your Bissell Vacuum Cleaner might not be turning on due to a few reasons. First, ensure the power cord is properly plugged into the electrical outlet. If it is, check your home's fuse box or circuit breakers; a blown fuse or tripped breaker could be the issue. Finally, inspect the power cord for any damage. If you notice damage, it is best to refer to a BISSELL authorized service center for repair or replacement.
M
Megan VaughanJul 30, 2025
What to do if my Bissell Vacuum Cleaner won't pick up dirt?
- R
  Rachel SanfordJul 31, 2025
  If your Bissell Vacuum Cleaner isn't picking up dirt, there could be several reasons: * Check the height adjustment of the powerfoot. * Make sure the hose is correctly attached to the suction opening. * Empty the dirt container. * Ensure the dirt container or upper tank is correctly positioned and locked in place. * Check and clean the pre-motor and post-motor filters. Also, inspect the hose for cracks or holes, and clear any clogs in the vacuum. If the drive belt is broken or worn, it needs replacement. Lastly, if the rotating floor brush bristles are worn or jammed, consider replacing the brush or removing debris from brush ends.
A
April GuzmanAug 4, 2025
Why is dirt escaping from my Bissell POWERLIFTER 1309?
- H
  Hailey BennettAug 4, 2025
  If you notice visible dirt escaping from your Bissell Vacuum Cleaner, the dirt container might be full, so you should empty it. Also, check the pre-motor and post-motor filters to ensure they are correctly installed.
M
Michael WoodAug 8, 2025
How to fix Bissell POWERLIFTER 1309 Vacuum Cleaner tools that won't pick up?
- M
  megan72Aug 8, 2025
  If the tools on your Bissell Vacuum Cleaner aren't picking up, start by checking the hose for any cracks or holes and replace if needed. Next, empty the dirt container and make sure the dirt container or upper tank is correctly positioned and locked in place. Also, check and clean the pre-motor and post-motor filters. Finally, check for any clogs in the vacuum.
D
Dean AllisonAug 13, 2025
Why won't my Bissell POWERLIFTER 1309 Vacuum Cleaner pick up dirt?
- I
  ihoustonAug 13, 2025
  If your Bissell Vacuum Cleaner isn't picking up dirt, several issues could be the cause. Ensure the hose is firmly attached to the suction opening by grasping the quick reach handle and pushing the hose wand onto the opening. Inspect the hose for cracks or holes and replace it if needed. A rotating floor brush jammed with debris, or bristles worn may be the reason, so remove the brush and clean any debris from the ends, or replace the brush. Also, check and clean the pre-motor and post-motor filters. Clogs in the vacuum can also prevent it from picking up dirt; in this case, follow the provided instructions for clearing clogs.
R
Raymond ArroyoAug 16, 2025
What to do if Bissell POWERLIFTER 1309 Vacuum Cleaner tools won't pick up?
- M
  Mark HooperAug 17, 2025
  If the tools on your Bissell Vacuum Cleaner aren't picking up, start by checking if the dirt container or upper tank is not installed properly. Position it correctly and lock it in place. Also, check and clean the pre-motor and post-motor filters. Finally, a clog in the vacuum can cause this issue, so follow the instructions for clearing clogs.
J
jeffrey65Aug 21, 2025
How to make my Bissell POWERLIFTER 1309 easier to push?
- K
  Kristen KerrAug 21, 2025
  If your Bissell Vacuum Cleaner is difficult to push, the powerfoot height adjustment may be incorrect. Adjust the powerfoot to the correct height setting.

Bissell POWERLIFTER 1309 SERIES Specifications

General

Brand	Bissell
Model	POWERLIFTER 1309 SERIES
Category	Vacuum Cleaner
Language	English

Summary

Important Safety Instructions

General Safety Warnings and Precautions

Lists crucial safety precautions for operating the vacuum cleaner to prevent hazards.

Polarized Plug Safety Feature

Explains the polarized plug feature for safety and proper outlet use.

Vacuum Assembly Guide

Vacuum Operations

Powering On and Reclining Vacuum

Adjusting Vacuum Height Settings

Vacuum Operations: Using Tools

Vacuum Operations: Dirt Tank

Procedure for Emptying Dirt Tank

Step-by-step instructions for safely removing and emptying the vacuum's dirt container.

Maintenance and Care

Pre-Motor Filter Cleaning

Instructions for cleaning or replacing the pre-motor filter for optimal performance.

Post-Motor Filter Cleaning

Guide on how to access, clean, or replace the post-motor filter.

Maintenance Safety Precautions

Essential safety warnings to follow during vacuum maintenance procedures.

Maintenance and Care: Brush and Belt

Checking Brush Roll and Drive Belt

Drive Belt Maintenance Safety

Safety warning specific to performing drive belt maintenance.

Maintenance and Care: Belt and Tank

Replacing the Drive Belt

Cleaning the Dirt Tank Separator

Maintenance and Care: Clogs

How to Clear Vacuum Clogs

Clog Clearing Safety

Safety precautions to observe when clearing any clogs in the vacuum.

Troubleshooting

Service

Contacting BISSELL Consumer Care

Related product manuals

Preview: Bissell POWERLIFTER 1793 Series

Bissell POWERLIFTER 1793 Series

Preview: Bissell PowerLifter

Bissell PowerLifter

Preview: Bissell Powerlifter Series

Bissell Powerlifter Series

Preview: Bissell POWERLIFTER REWIND

Bissell POWERLIFTER REWIND

Bissell POWERLIFTER TURBO PET

Preview: Bissell Powerlifter 2259 Series

Bissell Powerlifter 2259 Series

Preview: Bissell POWERLIFTER 2482 Series

Bissell POWERLIFTER 2482 Series

POWERLIFTER BAGGED 2019 Series

Preview: Powerlifter Swivel Pet 2260 Series

Powerlifter Swivel Pet 2260 Series

Preview: Bissell POWERGLIDE

Bissell POWERGLIDE

Bissell PowerBrush

Preview: Bissell POWERFORCE HELIX

Bissell POWERFORCE HELIX