EasyManuals Logo

Bissell ProHeat 2X Revolution Pet Quick Start Guide

Bissell ProHeat 2X Revolution Pet
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
My ProHeat 2X® Revolution® Pet Carpet
Cleaner has no suction to the hose | Support
Machine must be in upright position for suction at the hose
If dirty tank is full, it must be emptied
Check both tanks for cracks or other damage
o If part is damaged, it will need to be replaced
Check the bottom of the water tank to make sure it has a red auto-load gasket attached
Tanks must be seated properly
o To return the dirty tank, angle the tank and insert bottom-first
o Tilt the tank toward the machine and push the top in until it clicks into place
The clean water tank will not click, but should sit flush with no gaps

Other manuals for Bissell ProHeat 2X Revolution Pet

Questions and Answers:

Bissell ProHeat 2X Revolution Pet Specifications

General IconGeneral
TypeUpright Carpet Cleaner
Power Rating6.8 amps
Cleaning Path Width11 inches
Tank Capacity1 gallon
Heatwave TechnologyYes
Cord Length22 feet
Brush TypeDual DirtLifter PowerBrushes
HeaterYes
Specialized Pet ToolsYes
Warranty3-year limited

Related product manuals