Bissell REVOLUTION PET PRO 1964 series User Manual (English)

Questions and Answers:

D
David GreenJul 31, 2025
Why is there a loss of suction power in my Bissell REVOLUTION PET PRO 1964?
- D
  Destiny SuttonJul 31, 2025
  Loss of suction power in your Bissell Vacuum Cleaner can occur due to several reasons. The dirty tank might not be seated correctly, so pick it up and reseat it. Also, the dirty tank may be full, so empty it if it has reached the maximum fill line. Check the rubber tab on the dirty water tank and press firmly on all edges to ensure it's tightly sealed. Make sure the accessory hose door is closed and locked tightly. Additionally, the nozzle might be clogged, in which case you should use the nozzle clean out tool. Lastly, ensure the brush roll cover is fully snapped into place by removing the nozzle and brush roll cover, and making sure you hear both buttons click into place.
L
Lisa ValdezAug 5, 2025
How to fix reduced spray through the foot of my Bissell REVOLUTION PET PRO 1964?
- L
  Lori MonroeAug 5, 2025
  If you experience reduced or no spray through the foot of your Bissell Vacuum Cleaner, the clean water tank may be empty, so refill it. Alternatively, the tank might not be seated completely. Turn the power OFF, then remove and reseat the tank.
V
Valerie MartinAug 13, 2025
How to troubleshoot no spray through CleanShot® on my Bissell REVOLUTION PET PRO 1964?
- J
  Jonathan MooneyAug 13, 2025
  If there is no spray through the CleanShot® feature of your Bissell Vacuum Cleaner, first, check if the Clean Water tank is empty and refill it if needed. Also, ensure the Clean Tank is properly seated by turning the power OFF and reseating the tank. Make sure the machine is reclined by pressing the recline pedal and bringing the handle down. Finally, the pump may have lost prime. To resolve this, with the machine off and unplugged, remove the nozzle from the foot. Place a ball point pen in the black cylinder next to the screw; when water bubbles up, remove the pen and reassemble the nozzle before cleaning again.
F
Frank JacksonAug 17, 2025
Why is the tank leaking on my Bissell Vacuum Cleaner?
- E
  Elizabeth TorresAug 17, 2025
  If your Bissell Vacuum Cleaner tank is leaking, it may have been over-filled. Ensure the tank has the correct amount of water and formula. With the cap twisted on tightly, hold the tank at an angle over a sink or drain to pour out any extra water. Wipe the tank dry with a cloth. Also, water may be caught in the space between the tank and the tank’s handle.
D
derrickosborneAug 21, 2025
What to do if my Bissell REVOLUTION PET PRO 1964 Vacuum Cleaner has no power?
- J
  jacquelinehollandAug 21, 2025
  If your Bissell Vacuum Cleaner has no power, ensure you're pressing the red power button on the left side of the machine, not the cleaning mode switch. Also, verify that the outlet is active by plugging in a different device.
A
Angela MorenoAug 27, 2025
What to do if CleanShot® keeps spraying when my Bissell Vacuum Cleaner is off?
- Y
  Yolanda DavisAug 27, 2025
  If the CleanShot® continues to spray when your Bissell Vacuum Cleaner is off, ensure the CleanShot® button is in the “OFF” position. The button window will show the color red and a “O” symbol when it is in the off position; press the CleanShot® button to turn it off.