How to unblock the front caster wheel sensor on Bissell SPINWAVE 2859 Vacuum Cleaner?
If the front caster wheel sensor on your Bissell Vacuum Cleaner is blocked, turn the robot OFF, remove the front caster wheel assembly, clear any debris from the assembly housing, and then reinstall the wheel.
What to do if Bissell Vacuum Cleaner robot is trapped or cliff sensors are dirty?
If your Bissell Vacuum Cleaner robot is trapped, lifted, or the cliff sensors are dirty, place the robot on the floor away from objects and resume cleaning. If the error continues, turn the robot OFF and use a dry cloth to clean the three cliff sensors on the bottom of the robot.
General| Style | robotic mop |
|---|---|
| Color | pearl white, white |
| Floor Type | bare floor, carpet, ceramic tile, hardwoods, rugs |
| Dust Bin Capacity | 0.11 gallons |
| Filter | 2-stage |
| Bagless | yes |
| Wet And Dry Cleaning | yes |
| ?leaning Area | 6 inches |
| Remote Control | yes |
| Smart Applications | yes |
| Voltage | 14.4 volts |
Weight and Dimensions| Length | 14 inches |
|---|---|
| Height | 4 inches |
| Width | 13 inches |
| Net Weight | 7.5 pounds |
To Next Page
