Why is my Bissell SPOTCLEAN PRO losing suction power?
If your Bissell Vacuum Cleaner loses suction power, it might be due to several reasons. First, ensure that both tanks are correctly seated and fit snugly on the unit. Secondly, the dirty tank might be full; empty it if it has reached the maximum fill line. Lastly, check the fluid levels in the formula and water tank and refill if empty.
How to fix reduced spray or no spray on Bissell SPOTCLEAN PRO?
If your Bissell Vacuum Cleaner has reduced or no spray, start by refilling the formula and water tank. If the issue persists, turn the power off, then remove and reseat the tank to ensure it's completely in place. If there's still no spray, the pump may have lost its prime; hold the end of the hose below the water level in the tank to prime it.
What to do if my Bissell SPOTCLEAN PRO is not spraying?
What to do if your Bissell Vacuum Cleaner is not spraying? Ensure the formula and water tank is full. Also, make sure the formula and water tank is correctly seated. If the issue persists, you may need to prime the pump by holding the end of the hose below the water level in the tank.
How to restore suction on Bissell Vacuum Cleaner?
If your Bissell Vacuum Cleaner is losing suction, make sure that the tanks are seated properly. If the dirty tank has reached the full line, empty it. Check the fluid levels in the formula and water tank.
Details on pretreating stains for improved carpet cleaning performance.
Overview of 2X concentrated cleaning formulas for different cleaning needs.
Steps to take before deep cleaning, including optional pretreating.
Instructions for preparing the machine, connecting tools, and plugging in.
Guide on how to fill the formula and water tank correctly.
Detailed steps for operating the spot cleaner on soiled areas.
Instructions on how to properly empty and clean the dirty water tank.
Procedures for cleaning the spot cleaner's tools and hose after use.
Instructions for removing hair and debris from the machine's filter.
Information on the 2-year guarantee period and what it covers.
List of conditions and situations not covered by the guarantee.
How to contact BISSELL for service or guarantee claims.
Details on pretreating stains for improved carpet cleaning performance.
Overview of 2X concentrated cleaning formulas for different cleaning needs.
Steps to take before deep cleaning, including optional pretreating.
Instructions for preparing the machine, connecting tools, and plugging in.
Guide on how to fill the formula and water tank correctly.
Detailed steps for operating the spot cleaner on soiled areas.
Instructions on how to properly empty and clean the dirty water tank.
Procedures for cleaning the spot cleaner's tools and hose after use.
Instructions for removing hair and debris from the machine's filter.
Information on the 2-year guarantee period and what it covers.
List of conditions and situations not covered by the guarantee.
How to contact BISSELL for service or guarantee claims.
The BISSELL SpotClean Pro is a portable deep cleaner designed for effective spot and stain removal from carpets and upholstery. It is a compact and high-tech home cleaning system that leverages BISSELL's long history in floor care, dating back to 1876 when the first floor sweeper was invented.
The primary function of the SpotClean Pro is to pretreat, wash, and remove tough spots and stains from various surfaces. It uses a combination of cleaning formula and water, applied through a cleaning tool, to penetrate and loosen dirt, which is then suctioned into a dirty water tank. This process aims to improve carpet cleaning performance and restore the cleanliness of soiled areas. The device is particularly effective on heavily soiled carpets in high-traffic areas, such as entryways and hallways, as well as on specific stains.
The SpotClean Pro is designed for ease of use, starting with its assembly and preparation. Before deep cleaning, users are advised to remove loose dirt and impediments from the area. An optional pretreating step is recommended for heavily soiled areas, where a BISSELL Stain Pretreat formula is sprayed onto the affected area and allowed to penetrate for at least three minutes before cleaning.
To prepare the machine for operation, the flex hose is released by twisting its secure latch clockwise and unwrapped completely. Users can then attach either the Large Stain Tool or Tough Stain Tool to the hose grip, ensuring it snaps securely into place. The power cord is unwrapped by twisting the Quick Release™ cord wrap clockwise and plugged into a grounded outlet.
Filling the formula and water tank is a straightforward process. The tank is removed from the back of the machine by lifting its carry handle. It features a flat bottom for easy filling. The black cap is unscrewed, and the bottle insert is removed. Hot tap water (up to 140°F/60°C MAX) is filled to the water fill line, and 60 mL of BISSELL 2X concentrated formula is added. After replacing the bottle insert and tightening the cap, the tank is placed back on the machine.
For cleaning, the unit is plugged in and turned on by pressing the power button. The cleaning tool is held approximately 2.5 cm above the soiled surface, and the spray trigger is pressed to apply the cleaning solution. The brush on the cleaning tool is then used to gently scrub the area. For thorough cleaning, additional solution can be sprayed while the brush and suction are in contact with the surface. Downward pressure is applied to the cleaning tool, and it is pulled toward the user to suction up the dirt and cleaning solution. This process is repeated until no more dirt can be removed. As a final step, "drying strokes" are performed without pressing the spray trigger to remove as much liquid and moisture as possible.
The SpotClean Pro offers a range of 2X concentrated cleaning formulas tailored for different needs:
The device is equipped with a carry handle for portability, a power button, a dirty water tank, a power cord with Quick Release™ cord wrap, and a flex hose. The cleaning tool is designed to facilitate effective scrubbing and suction.
Regular maintenance ensures the optimal performance and longevity of the SpotClean Pro. The dirty water tank needs to be emptied when the "FULL" line is reached. To do this, the tank is removed and carried to a utility sink or toilet for disposal of the dirty water. The handle is rotated over the back of the tank to unlock the lid, which is then removed to pour out the dirty water. The tank should be rinsed to remove any debris. After rinsing, the lid is replaced, and the handle is rotated forward to lock it in place on the front of the tank. Before reattaching the tank to the machine, any debris from the red filter should be wiped away.
The cleaning tools should be removed and rinsed under clean, running water, then allowed to dry. To rinse out the hose, it is recommended to suction clean water from a bowl. The end of the hose should then be lifted and stretched out to ensure all water is cleared. Finally, the flex hose is wrapped around the hose wrap and secured with its latch for storage.
The debris filter should be checked regularly, and any hair and debris removed from the red filter before placing the Dirty Water Tank back onto the machine.
Troubleshooting guidance is provided for common issues:
Safety instructions emphasize unplugging the appliance before maintenance and ensuring all controls are turned off. The device is designed for household use only and should not be used with damaged cables or plugs, or to pick up flammable, toxic, or sharp objects. Only BISSELL cleaning products intended for use with the machine should be used, and the specified type and amount of liquids should be followed. The float must always be installed before any wet pick-up operation.
General| Type | Cylinder vacuum |
|---|---|
| Hose length | 1.5 m |
| Cleaning type | Dry&wet |
| Dust capacity | - L |
| Product color | Black, Red, Transparent |
| Dust container type | Bagless |
| Liquid tank capacity | 2.8 L |
| Maximum input power | 750 W |
| Annual energy consumption | - kWh |
| Proper use | Home |
| Noise level | 84 dB |
| Cleaning surfaces | Carpet, Stair steps, Upholstery |
| Vacuum air filtering | - |
| Dirt separating method | Aqua filtering |
| Cord length | 6.7 m |
Weight and Dimensions| Depth | 250 mm |
|---|---|
| Width | 360 mm |
| Height | 356 mm |
| Weight | 5800 g |
To Next Page