Why is my Bissell Vacuum Cleaner not picking up solution?
There are several reasons why your Bissell Vacuum Cleaner might not be picking up solution. The lint screen may be clogged, so clean it. The 2-in-1 tank may be full or not properly seated, so empty and reseat the tank. Also, ensure the 2-in-1 tank lid is correctly installed. Finally, check that the removable nozzle is properly attached by lining up the slots and clicking it into place.
What to do if my Bissell STAINPRO 1623 has reduced or no spray?
If your Bissell Vacuum Cleaner has reduced or no spray, the bladder may be empty; turn the power switch off and refill the bladder with clean hot tap water. The 2-in-1 tank may not be seated properly; turn the power switch off, remove the tank, and reseat it. The pump may have lost prime; turn the power switch off, wait one minute, then turn it back on and depress the spray release trigger. Finally, the pump belt may be broken; turn the power switch off and unplug the cleaner to examine the belt for breakage.
General| Product Type | Upright Carpet Cleaner |
|---|---|
| Type | Upright |
| Surface Recommendation | Carpet, Upholstery |
| Power Source | Corded Electric |
| Voltage | 120 V |
| Brush System | DirtLifter PowerBrush |
| Included Accessories | 3" Tough Stain Tool |
| Model Number | 1623 |
| Cleaning Solution | Bissell Cleaning Formula |
Instructions for proper grounding of the appliance to prevent electric shock.
Pretreatment solutions for improving carpet cleaning on spots and stains.
BISSELL advanced cleaning formulas for deep cleaning performance.
Advice on preparing the area and carpet before cleaning.
Features the DirtLifter PowerBrush for enhanced carpet cleaning performance.
Allows selection between floor cleaning and tool cleaning modes.
Integrated measuring cup for correct formula-to-water ratio.
System with separate clean and dirty water tanks for efficient cleaning.
Preparation steps before starting cleaning, including planning and debris removal.
Instructions for filling the clean water tank with formula and water.
Recommends pretreating heavily soiled carpets for better cleaning results.
Continuation of filling the clean water tank and securing the lid.
Step-by-step guide on operating the machine for effective carpet cleaning.
Procedures for emptying dirty water and cleaning the nozzle.
How to use attachments for cleaning upholstery, stairs, and other surfaces.
Detailed steps for using the Ready Tools feature and attachments.
Steps to maintain the machine after use for optimal performance.
Guidelines for safely storing the deep cleaner to prevent damage.
Details the terms and duration of the product's limited warranty.
Outlines specific conditions and situations not covered by the warranty.
Information on how to get service or repairs for the product.
Benefits of registering for quicker and more efficient customer support.
Optional registration for offers, contests, and cleaning tips.
Receive important maintenance reminders and alerts.
Where to find and order replacement parts and cleaning supplies.
To Next Page