Need help?Do you have a question about the Bistos BT-720 and is the answer not in the manual?
General| Brand | Bistos |
|---|---|
| Model | BT-720 |
| Category | Medical Equipment |
| Language | English |
Explains symbols for safety instructions and device identification.
Covers general precautions, warnings, and cautions for safe operation.
Details potential electrical shock hazards and necessary precautions.
Provides critical warnings regarding the device's battery.
Outlines environmental conditions to avoid during operation and storage.
Describes the purpose and target users of the BT-720 patient monitor.
Briefly explains how the monitor's core functions work.
Lists the standard and optional components of the BT-720 system.
Provides visual overview of the BT-720 monitor's front and rear views.
Details the functions of various parts and controls on the monitor.
Explains the elements and information displayed on the monitor's screen.
Outlines the core functionalities and performance characteristics of the device.
Instructions for installing the BT-720 patient monitor and its accessories.
Steps for unpacking and inspecting the monitor and its components.
Guidelines for positioning the monitor for optimal use and connectivity.
Details the power specifications for the adapter and battery.
Specifies the operating, transport, and storage environmental conditions.
Step-by-step instructions for connecting the monitor to a power source.
Procedures for powering on the BT-720 patient monitor.
Steps to check the monitor's condition before powering on.
Steps to initiate the monitor after checks and power connection.
How to connect the necessary patient sensors to the monitor.
Guide to beginning patient monitoring after setup.
Procedures for safely powering down the BT-720 patient monitor.
How to select the patient type (Adult, Pediatric, Neonate) for accurate monitoring.
Configuration of alarm parameters like delay, volume, and signal.
How to set and format the date and time on the monitor.
Options for changing the interface language and configuring network settings.
Instructions for setting passwords for security.
Introduction to SpO2 monitoring and its measurement principles.
Specific safety warnings and precautions for SpO2 monitoring.
Step-by-step guide to performing SpO2 monitoring on a patient.
How to configure SpO2 parameters, limits, and alarms.
Factors that can affect the accuracy of SpO2 measurements.
Technical specifications and compliance details for SpO2 monitoring.
Introduction to Non-Invasive Blood Pressure (NIBP) monitoring.
Specific safety warnings and precautions for NIBP measurement.
Limitations and conditions that may affect NIBP measurement accuracy.
Detailed steps for performing NIBP measurements.
Steps to prepare the patient and equipment before NIBP measurement.
Recommended patient positioning for accurate NIBP measurement.
How to initiate and terminate NIBP measurements using the monitor.
Methods for adjusting NIBP readings based on measurement position.
How to configure NIBP parameters, intervals, and pressure settings.
Procedures for cleaning and disinfecting NIBP cuffs and accessories.
How to view historical SpO2 data trends on the monitor.
How to view historical NIBP data trends on the monitor.
Lists physiological and technical alarms, their sources, and messages.
Lists various NIBP-related alarms and their descriptions.
Information about the monitor's built-in rechargeable battery and its status indicators.
Guidelines for optimal use and maintenance of the battery for longevity.
Steps to test and assess the battery's performance and duration.
Instructions and warnings regarding the proper disposal and recycling of used batteries.
General guidelines for cleaning and maintaining the monitor.
Procedures and recommended cleaning agents for the device.
Procedures and recommendations for disinfecting the monitor.
Basic checks to perform on the monitor before use.
Schedule and tasks for regular maintenance by qualified personnel.
Lists the standard accessories included with the BT-720 monitor.
Lists optional accessories available for the BT-720 monitor.
Details safety classifications and requirements for the device.
Technical specifications for the monitor's hardware components.
Detailed functional specifications for SpO2 and PR measurements.
Functional specifications for Non-Invasive Blood Pressure (NIBP) measurements.
Common operational problems and their troubleshooting steps.
Addresses specific issues like no SpO2 waveform or NIBP measurement failures.
Important notes regarding accessory use and EMC protection.
Information on electromagnetic emissions compliance and guidance.
Guidelines for maintaining safe distances from RF communication equipment.
Details on harmonic emissions and voltage fluctuations compliance.
Details on electromagnetic immunity tests and compliance levels.
Information on RF immunity and further separation distance guidance.
Contact information for service and support.
To Next Page
