BITMAIN AntMiner S9 Installation Guide

S19 Pro+ Hydro Server Installation
- 11 -
3. Configuring the Server
3.
Configuring the Server
Setting up the Pool
To configure the server:
1. Click Settings as below.
2. Set the options according to the following table.
Option
Description
Mining address
Enter the address of your desired pool.
The S19 Pro+ Hydro servers can be set up with three mining pools, with
decreasing priority from the first pool (pool 1) to
the third pool (pool 3). The pools
with low priority will only be used if all higher priority pools are offline.
Name
Your worker ID on the selected pool.
Password (optional)
The password for your selected worker.
3. Click Save after the configuration.

BITMAIN AntMiner S9 Specifications

General

Hashrate	13.5 TH/s
Power Consumption	1323W
Power Efficiency	0.098 J/GH
Chip Type	BM1387
Chip Quantity	189
Rated Voltage	11.60 ~ 13.00V
Cooling	2x 12038 fans
Operating Temperature	0°C to 40°C
Network Connection	Ethernet
Dimensions	350mm(L) x 135mm(W) x 158mm(H)
Weight	4.2 kg
Noise Level	76 dB
Frequency	600MHz
PSU Requirement	APW3++